dpc-64-rs232 ABACOM Technologies, Inc, dpc-64-rs232 Datasheet

dpc-64-rs232

Manufacturer Part Number

dpc-64-rs232

Description

Dpc-64-rs232 Transceiver Module

Manufacturer

ABACOM Technologies, Inc

Datasheet

1.DPC-64-RS232.pdf (2 pages)

Current page: 1 of 2
Download datasheet (44Kb)

DPC-64-RS232

Transceiver Module

Introduction

The DPC-64-RS232 transceiver module provides a transparent serial link between two host

devices, where packets of up to 64 bytes of data may be transceived. All data encoding, decoding

and error checking is performed by the DPC-64-RS232 leaving nothing more for the host to do,

other than sending data in x.8.N.1 serial format to the DPC. The serial data sent by the host to

the DPC is automatically encoded and packetized and then transmitted over the air to the

receiving DPC.

Upon receipt of the radio data transmission, the DPC will decode the data, perform an error check

and output the original data to the receiving host.

Power Supply

Although the operating supply range is from 7.5Vdc to 15Vdc, 20mA, the DPC is supplied

standard with a 9V battery connector – alternative power sources within range may of course be

used. Polarity should be observed. As a protective measure for the host equipment, we

recommend applying power to the DPC only after it has been connected to the host.

Serial interface

The DPC-64-RS232 transceiver implements a standard serial interface and is configured as a

DTE.Connection to, for example, a personal computer COM port can be made using a standard

DB9 connector serial extension cable having a one male and one female connector.

ABACOM Technologies

32 Blair Athol Crescent Etobicoke ON M9A 1X5 Canada Tel +416-236-3858 Fax +416-236-8866

Related parts for dpc-64-rs232

dpc-64-rs232 Summary of contents

Page 1

... All data encoding, decoding and error checking is performed by the DPC-64-RS232 leaving nothing more for the host to do, other than sending data in x.8.N.1 serial format to the DPC. The serial data sent by the host to the DPC is automatically encoded and packetized and then transmitted over the air to the receiving DPC ...

Page 2

... DPC has received 64 bytes, the DPC will signal the host to pause sending data allowing it to transmit the 64 bytes of data to the receiving DPC. Once the DPC has transmitted the data, the CTS flow control line will toggle, allowing the DPC to receive the next 64 bytes of data from the host. ...

Related keywords

dpc-64-rs232 datasheet
dpc-64-rs232 data sheet
dpc-64-rs232 pdf datasheet
dpc-64-rs232 component
dpc-64-rs232 part
dpc-64-rs232 distributor
dpc-64-rs232 RoHS
dpc-64-rs232 datasheet download