mtsm745ka-ur-a Marktech Optoelectronics, mtsm745ka-ur-a Datasheet - Page 6

• Manufacturer Part Number: mtsm745ka-ur-a
• Description: 3.2 X 2.8mm Smd Type
• Manufacturer: Marktech Optoelectronics

MTSM745KA-UR-A
3.2 x 2.8mm SMD TYPE
Handling of Silicone Resin LEDs
Handling Indications
During processing, mechanical stress on the surface should be minimized as much as possible.
Sharp objects of all types should not be used to pierce the sealing compound
Figure 1
In general, LEDs should only be handled from the side. By the way, this also applies to LEDs
without a silicone sealant, since the surface can also become scratched.
Figure 2
When populating boards in SMT production, there are basically no restrictions regarding the form
of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be
prevented.
This is assured by choosing a pick and place nozzle which is larger than the LED’s reflector area.
VER.: 01 Date: 2007/10/04 Page: 5/7