tmp90p802ap ETC-unknow, tmp90p802ap Datasheet - Page 6

• Manufacturer Part Number: tmp90p802ap
• Manufacturer: ETC-unknow

TMP90P802A
6/14
3. Operation
The TMP90P802A is the OTP version of the TMP90C802A
that is replaced an internal ROM from Mask ROM to EPROM.
TMP90C840A.
are not described this section.
and operation in the relation to the TMP90P802A.
mode.
The function of TMP90P802A is exactly same as that of
Refer to the TMP90C802A except the functions which
The following is an explanation of the hardware configuration
The TMP90P802A has an MCU mode and a PROM
Figure 3.1. TMP90P802A Memory Map
3.1 MCU Mode
(1)
(2)
Mode Setting and Function
The MCU mode is set by opening the CLK pin (Output
status).
In the MCU mode, the operation is the same as that of
TMP90C802A.
Memory Map
Figure 3.1 shows the memory map of TMP90P802A,
and the accessing area by the respective address-
ing mode.
TOSHIBA CORPORATION