tmp95c061bfg TOSHIBA Semiconductor CORPORATION, tmp95c061bfg Datasheet - Page 4

• Manufacturer Part Number: tmp95c061bfg
• Description: Toshiba Original Cmos 16-bit Microcontroller
• Manufacturer: TOSHIBA Semiconductor CORPORATION

RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer,
• The products described in this document shall not be used or embedded to any downstream products of which
• The information contained herein is presented only as a guide for the applications of our products. No responsibility
• Please contact your sales representative for product-by-product details in this document regarding RoHS
• For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter
1. Part number
2. Package code and dimensions
3. Addition of notes on lead solderability
4. RESTRICTIONS ON PRODUCT USE
5. Publication date of the datasheet
Solderability of lead free products
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety
in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such
TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These
TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high
quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury
(“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship
instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical
instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall
be made at the customer’s own risk.
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its
use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third
parties.
compatibility. Please use these products in this document in compliance with all applicable laws and regulations that
regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring
as a result of noncompliance with applicable laws and regulations.
entitled Quality and Reliability Assurance/Handling Precautions.
Note: Pb-containing variant not available.
*
Test Parameter
: For the dimensions of the new package, see the attached Package Dimensions diagram.
Previous Part Number
The following solderability test is conducted on the new device.
The following replaces the “RESTRICTIONS ON PRODUCT USE” on page 1 of body text.
The publication date of this datasheet is printed at the lower right corner of this notification.
Solderability
(in Body Text)
TMP95C061BF
−
(Note)
Use of Sn-37Pb solder Bath
Solder bath temperature = 230°C, Dipping time = 5 seconds
The number of times = one, Use of R-type flux
Use of Sn-3.0Ag-0.5Cu solder bath
Solder bath temperature = 245°C, Dipping time = 5 seconds
The number of times = one, Use of R-type flux
(use of lead free)
Previous Package Code
P-QFP100-1414-0.50
(in Body Text)
−
Test Condition
(Note)
II
New Part Number
TMP95C061BDFG
TMP95C061BFG
Pass:
Solderability rate until forming
≥ 95%
New Package Code
LQFP100-P-1414-0.50F
QFP100-P-1414-0.50F
Note
TMP95C061B
2008-02-20
20070701-EN