cp2200 Silicon Laboratories, cp2200 Datasheet - Page 106

• Manufacturer Part Number: cp2200
• Description: Single-chip Ethernet Controller
• Manufacturer: Silicon Laboratories

CP2200/1
D
Revision 0.4 to Revision 0.41
Revision 0.41 to Revision 1.0
106
OCUMENT
Modified Figure 2, “Typical Connection Diagram (Non-Multiplexed),” on page 6 and Figure 3, “Typical
Connection Diagram (Multiplexed),” on page 7 for improved EMI emmissions and common mode stability.
Added Maximum Supply Current specification in Table 2 on page 9.
Updated the maximum XTAL1 Input Low Voltage specification from 0.8 to 0.7 V (see Table 8 on page 20).
Updated the maximum RST Input Pullup Current specification from 40 to 50 µA (see Table 13 on page 42).
Updated the Non-Multiplexed EMIF address hold time from 20 to 30 ns and the T
60 ns. Note that the T
will not be required in most applications. See Section 16 on page 96.
Added a Revision-Specific Behavior chapter. See Section 17 on page 104.
Removed text indicating that all packets on the wire can be received and buffered by the CP220x.
C
HANGE
hold
specification is unchanged from its value of 60 ns; therefore, changes to host timing
L
IST
Rev. 1.0
vd2
specification from 40 to