K240QVK-V60-F Kitronix, K240QVK-V60-F Datasheet - Page 15

• Manufacturer Part Number: K240QVK-V60-F
• Description: Standard LCD Module
• Manufacturer: Kitronix

LCM with touch pannel.
assembly of customer’ s product. Defects are classified as major defects and minor defects according to the
degree of defectiveness defined herein.
10. Inspection Standard
This specification is made to be used as the standard acceptance/rejection criteria for Color mobile phone
10.1 Sample plan and Inspection condition
10.2 Definition of inspection zone in LCD
Zone A: character/Digit area;
Zone B: viewing area except Zone A (ZoneA+ZoneB=minimum Viewing area);
Zone C: Outside viewing area (invisible area after assembly in customer’ s product);
Note: As a general rule, visual defects in Zone C are permissible, when it is no trouble for quality and
10.3 Major defects and Minor defects
10.1.1 Sample plan
Sampling plan according to MIL-STD-105E , normal level 2 and based on:
Major defect: AQL 0.65;
Minor defect: AQL 1.5.
10.1.2 Inspection condition
20~40W light intensity, all directions for inspecting the sample should be within 45 against perpendicular
line.
10.3.1 Major defects
intended purpose.
Viewing distance for cosmetic inspection is about 30cm with bare eyes, and under an environment of
A major defect is a defect that is likely to result in failure, or to reduce the usability of the product for its
10.3.1.1 Abnormal operation: modules cannot display normally;
Kitronix (Dong guan) Ltd.
PRODUCT SPECIFICATION
Inspection zones in an LCD
www.DataSheet4U.com
26/Jul/2009
FS-K240QVK-V60-F
PAGE 14 OF 20