2007464-3 TE Connectivity, 2007464-3 Datasheet - Page 2

• Manufacturer Part Number: 2007464-3
• Manufacturer: TE Connectivity

Specifications of 2007464-3

• Product Type: Cage
• Termination Type: Press-Fit
• Configuration: Single Port
• Pcb Mount: Double Sided (Belly-to-Belly)
• Termination Post Length (mm [in]): 2.05 [0.081]
• Cage Type: Single
• Cage Material: Nickel Silver
• Emi Containment: External Springs
• Lightpipe: Without
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Application: SFP+
• Heat Sink Application: Networking
• Packaging Method: Tray

3.3.
3.4.
3.5.
Initial exam ination of product.
Final exam ination of product.
Low Level Contact Resistance
(LLCR).
Solderability.
Random vibration.
Mechanical shock.
Durability.
Rev C
Ratings
!
!
!
Perform ance and Test Description
Product is designed to m eet the electrical, m echanical and environm ental perform ance requirem ents
specified in Figure 1. Unless otherwise specified, all tests shall be perform ed at am bient environm ental
conditions.
Test Requirem ents and Procedures Sum m ary
Test Description
Voltage: 120 volts AC
Current: Signal application only
Tem perature: -55 to 105°C for cage assem bly
Meets visual requirem ents.
Meets requirem ents of product
drawing and Application
Specification 114-13120.
35 m illiohm s m axim um initial.
ÄR 10 m illiohm s m axim um .
Shield and signal contacts.
Solderable areas shall have a
m inim um of 95% coverage.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirem ent
EIA-364-18.
EIA-364-18.
Visual and dim ensional (C of C)
inspection per product drawing.
Visual inspection.
EIA-364-23.
Subject specim ens to 100
m illiam peres m axim um and 20
m illivolts m axim um open circuit
voltage.
JEDEC JESD22-B102D, Method 1
for lead-free solder.
EIA-364-28, Test Condition VII,
Condition Letter D.
Subject m ated specim ens to 3.13
G's rm s between 20 to 500 Hz.
Fifteen m inutes in each of 3
m utually perpendicular planes.
EIA-364-27, Condition H.
Subject m ated specim ens to 30 G's
half-sine shock pulses of 11
m illiseconds duration. Three shocks
in each direction applied along 3
m utually perpendicular planes, 18
total shocks.
EIA-364-9.
Mate and unm ate specim ens for
100 cycles at a m axim um rate of
500 cycles per hour with cage latch
operable.
Procedure
108-2364
2 of 6