FT2232HQ - TRAY FTDI, Future Technology Devices International Ltd, FT2232HQ - TRAY Datasheet - Page 16

• Manufacturer Part Number: FT2232HQ - TRAY
• Description: IC USB UART/FIFO DUAL HS 64-QFN
• Manufacturer: FTDI, Future Technology Devices International Ltd
• Series: USBmadeEZ-FIFOr

Specifications of FT2232HQ - TRAY

• Features: USB to UART and/or FIFO, SPI, I2C, JTAG
• Number Of Channels: 2, DUART
• Fifo's: 4096 Byte
• Protocol: RS-232, RS-422, RS-485
• Voltage - Supply: 3 V ~ 3.6 V
• With Parallel Port: Yes
• With Auto Flow Control: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 64-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: FT2232HQ - TRAY

3.4.6 FT2232H Pins used as a Fast Serial Interface
The FT2232H channel B can be configured for use with high-speed optical bi-directional isolated serial
data transfer: Fast Serial Interface. (Not available on channel A). A proprietary FTDI protocol designed to
allow galvanic isolated devices to communicate synchronously with the FT2232H using just 4 signal wires
(over two dual opto-isolators), and two power lines. The peripheral circuitry controls the data transfer
rate in both directions, whilst maintaining full data integrity. Maximum USB full speed data rates can be
achieved. Both „A‟ and „B‟ channels can communicate over the same 4 wire interface if desired.
When configured in this mode, the pins used and the descriptions of the signals are shown in Table 3.9.
Table 3.9 Channel B Fast Serial Interface Configured Pin Descriptions
For a functional description of this mode, please refer to section 4.8 Fast Opto-Isolated Serial Interface
Mode Description
Channel B
Pin No.
38
39
40
41
Copyright © 2010 Future Technology Devices International Limited
Name
FSCLK
FSCTS
FSDO
FT2232H DUAL HIGH SPEED USB TO MULTIPURPOSE UART/FIFO IC
FSDI
OUTPUT
OUTPUT
INPUT
INPUT
Type
Fast serial data input.
Fast serial clock input.
Clock input to FT2232H chip to clock data in
or out.
Fast serial data output.
Fast serial Clear To Send signal output.
Driven low to indicate that the chip is ready
to send data
Fast Serial Interface Configuration
Description
Document No.: FT_000061
Clearance No.: FTDI#77
Datasheet Version 2.10
16