030-2492-001 ITT Cannon, LLC, 030-2492-001 Datasheet - Page 59

• Manufacturer Part Number: 030-2492-001
• Description: CONN CONTACT FLAT 24-26AWG GOLD
• Manufacturer: ITT Cannon, LLC
• Series: DLr
• Type: Signalr

Specifications of 030-2492-001

• Pin Or Socket: Non-Gendered
• Contact Termination: Crimp
• Wire Gauge: 24-26 AWG
• Contact Finish: Gold
• Contact Finish Thickness: 50µin (1.27µm)
• Current Rating: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With: 1003-1681 - DLM 96C SHIELDED RECPT
• Other names: 0302492001; 1003-1626; DL CRIMP 24-26 50AU(T)NOBUMP

58
ZIF Connectors
Assembly Instructions for Square Post Contacts
Contact Insertion:
Square Post Contacts are factory installed but can
be removed and replaced if damaged in service.
Step 1. Prior to inserting contacts, actuating handle
must be in the maximum open position. Actuating
handle will be facing toward connector front face,
see Figure 1.
Step 2. Contacts are inserted from the insulator
front face by hand and are seated and clicked in the
cavity by pulling on the terminal post with flat nose
pliers, see Figure 2.
Contact Removal for Square Post Contacts
Tool: CET-ECP and CET-ECP-1
Place tool over square post terminal and impact
tool. Apply sufficient force to collapse retention
lance and push contact out of insulator. This
process destroys the retention lance.
RETENTION
CONTACT
LANCE
Figure 1
Figure 2
CONNECTOR
FRONT FACE
Tools and Assembly
Dimensions are shown in mm (inch)
Dimensions subject to change
CONTACT
RETENTION
LANCE