RF-TO-USB2-RD Silicon Laboratories Inc, RF-TO-USB2-RD Datasheet - Page 8

• Manufacturer Part Number: RF-TO-USB2-RD
• Description: RF TO USB EVAL REF DESIGN
• Manufacturer: Silicon Laboratories Inc
• Series: -r
• Type: Sensor Demor

Specifications of RF-TO-USB2-RD

• Frequency: 915MHz
• Lead Free Status / Rohs Status: Contains lead / RoHS non-compliant
• For Use With/related Products: -
• Other names: 336-2139

RF-to-USB-RD2
5.2. Building and Downloading the Project
1. Open the Silabs IDE and load the project:
2. Set the power switch on one of the two node boards to “TS 3.3V” (ToolStick 3.3 V)
3. Plug the node board in to the ToolStick Programming Adapter, and connect the adapter to your PC's USB port
4. Connect the IDE to the programming adapter and Node Board as shown in Figure 13.
5. Build and download the project as shown in Figure 14.
8
C:\Silabs\MCU\RF_to_USB_RD\Firmware\PreProcessorPHY_TxRx\ppPhyTxRx.wsp
as shown in Figure 12.
Figure 13. Connect IDE to Programming Adapter and Node Board
Figure 12. Connect Adapter to PC USB Port
Figure 14. Build and Download Project
Figure 11. Power Switch to TS 3.3 V
Rev. 0.2