ADG1206YRUZ Analog Devices Inc, ADG1206YRUZ Datasheet - Page 16

• Manufacturer Part Number: ADG1206YRUZ
• Description: IC MULTIPLEXER 16X1 28TSSOP
• Manufacturer: Analog Devices Inc
• Series: iCMOS®r
• Type: Analog Multiplexerr

Specifications of ADG1206YRUZ

• Function: Multiplexer
• Circuit: 1 x 16:1
• On-state Resistance: 270 Ohm
• Voltage Supply Source: Dual Supply
• Voltage - Supply, Single/dual (±): ±14 V ~ 16 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 28-TSSOP (0.173", 4.40mm Width)
• No. Of Circuits: 1
• Supply Current: 260µA
• On State Resistance Max: 120ohm
• Supply Voltage Range: 10.8V To 13.2V, ± 13.5V To ± 16.5V
• Operating Temperature Range: -40°C To +125°C
• Multiplexer Configuration: Single 16:1
• Number Of Inputs: 16
• Number Of Outputs: 1
• Number Of Channels: 1
• Analog Switch On Resistance: 475@10.8VOhm
• Analog Switch Turn On Time: 100ns
• Analog Switch Turn Off Time: 110ns
• Package Type: TSSOP
• Power Supply Requirement: Single/Dual
• Single Supply Voltage (min): 5V
• Single Supply Voltage (typ): 12V
• Single Supply Voltage (max): 16.5V
• Dual Supply Voltage (min): ±5V
• Dual Supply Voltage (typ): ±15V
• Dual Supply Voltage (max): ±16.5V
• Mounting: Surface Mount
• Pin Count: 28
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: Q2936649

ADG1206/ADG1207
TERMINOLOGY
R
Ohmic resistance between D and S.
ΔR
Difference between the R
R
Flatness is defined as the difference between the maximum and
minimum value of on resistance as measured.
I
Source leakage current when the switch is off.
I
Drain leakage current when the switch is off.
I
Channel leakage current when the switch is on.
V
Analog voltage on Terminals D and S.
C
Channel input capacitance for the off condition.
C
Channel output capacitance for the off condition.
C
On switch capacitance.
C
Digital input capacitance.
t
Delay time between the 50% and 90% points of the digital input
and the switch on condition.
t
Delay time between the 50% and 90% points of the digital input
and the switch off condition.
t
Delay time between the 50% and 90% points of the digital
inputs and the switch on condition when switching from one
address state to another.
S
D
D
ON
OFF
TRANSITION
ON
FLAT(ON)
S
D
D
IN
D
, I
(Off)
(Off)
, C
(Off)
ON
(V
(Off)
(EN)
(EN)
S
(On)
S
S
)
(On)
ON
of any two channels.
Rev. A | Page 16 of 20
T
Off time measured between the 80% points of the switches
when switching from one address state to another.
V
Maximum input voltage for Logic 0.
V
Minimum input voltage for Logic 1.
I
Input current of the digital input.
I
Positive supply current.
I
Negative supply current.
Off Isolation
A measure of unwanted signal coupling through an off channel.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
Bandwidth
The frequency at which the output is attenuated by 3 dB.
On Response
The frequency response of the on switch.
THD + N
The ratio of the harmonic amplitude plus noise of the signal to
the fundamental.
ACPSRR (AC Power Supply Rejection Ratio)
Measures the ability of a part to avoid coupling noise and
spurious signals that appear on the supply voltage pin to the
output of the switch. The dc voltage on the device is modulated
by a sine wave of 0.62 V p-p. The ratio of the amplitude of
signal on the output to the amplitude of the modulation is the
ACPSRR.
INL
DD
SS
BBM
INL
INH
(I
INH
)