ZMOTIONS200ZCOG Zilog, ZMOTIONS200ZCOG Datasheet - Page 31

• Manufacturer Part Number: ZMOTIONS200ZCOG
• Description: KIT DEV ZMOTION MODULE
• Manufacturer: Zilog
• Series: ZMOTION™r

Specifications of ZMOTIONS200ZCOG

• Sensor Type: Motion, PIR (Pyroelectric Infrared)
• Sensing Range: -
• Interface: USB/Serial
• Sensitivity: -
• Voltage - Supply: -
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: ZMOT1AHH
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 269-4823

PS028801-0311
Bit
Field
Control
Address
PIR Enable/Disable Pattern (Bits 7–0)
PIR Enable/Disable Register; controlled by the application.
• The PIR Enable Register controls the overall operation of the PIR Engine. As an added level of
• To enable the PIR Engine, first write the ePIR_ENABLE_PATTERN to the PIR Enable Register, then
Pattern
00h
11h
protection, there are specific 8-bit enable and disable values; all other values are reserved. Reading this
register returns the last value written. Once enabled, the PIR Engine reads the application-controlled
Status/Control Register values and sets the Engine-controlled values to their default states.
execute the EPIR_INIT macro. See Table 6.
Name
ePIR_DISABLE_PATTERN
ePIR_ENABLE_PATTERN
Tables 5 through 15 describe each of the standard API registers listed in Table 4.
7
6
Table 6. PIR Software Enable Patterns
Table 5. PIR Engine Enable Register
5
Description
Disables all PIR Engine functions, including motion detection.
Used to temporarily or permanently shut down the Engine.
Enables the PIR Engine. All primary Engine functions, as
configured in Engine Status/Control Registers, are enabled.
Confirmation of enabled status is provided through the Engine
Disabled bit in Status/Control Register 0.
(ePIR_Enable)
PIR Enable/Disable Pattern
4
Read/Write
100H
3
ZMOTION
2
Standard API Register Set
Product Specification
™
Intrusion Detection
1
0
24