PCA9701PW,112 NXP Semiconductors, PCA9701PW,112 Datasheet - Page 8

• Manufacturer Part Number: PCA9701PW,112
• Description: IC SPI GPI 16-BIT 24-TSSOP
• Manufacturer: NXP Semiconductors

Specifications of PCA9701PW,112

• Applications: Automotive
• Interface: SPI Serial
• Voltage - Supply: 2.5 V ~ 5.5 V
• Package / Case: 24-TSSOP
• Mounting Type: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935283619112; PCA9701PW; PCA9701PW

NXP Semiconductors
PCA9701_PCA9702_5
Product data sheet
7.3 General Purpose Inputs
Table 3.
H = HIGH; L = LOW; X = don’t care
[1]
[2]
The General Purpose Inputs (GPI) are designed to behave like a typical input in the 0 V to
5.5 V range, but are also designed to have low leakage currents at elevated voltages. The
input structure allows for elevated voltages to be applied through a series resistor. The
series resistor is required when the input voltage is above 5.5 V. The series resistor is
required for two reasons: first, to prevent damage to the input avalanche diode, and
second, to prevent the ESD protection circuitry from creating an excessive current flow.
The ESD protection circuitry includes a latch-back style device, which provides excellent
ESD protection during assembly or typical 5.5 V applications. The series resistor limits the
current flowing into the part and provides additional ESD protection. The limited current
prevents the ESD latch-back device from latching back to a low voltage, which would
cause excessive current flow and damage the part.
The minimum required series resistance for applications with input voltages above 5.5 V is
100 k . For applications requiring an applied voltage above 27 V,
recommended to determine the series resistor. Failure to include the appropriate input
series resistor may result in product failure and will void the warranty.
The series resistor should be placed physically as close as possible to the connected
input to reduce the effective node capacitance. The input response time is effected by the
RC time constant of the series resistor and the input node capacitance.
R
INT_EN
H
H
H
H
L
s
=
Input status register is the value or content of the D flip-flops.
Logic states shown for INT pin assumes 10 k pull-up resistor.
voltage applied 17 V
----------------------------------------------------------- -
Interrupt output function truth table
Input port status
L
L
H
H
X
I
I
Rev. 05 — 11 November 2009
–
Input status register
L
H
L
H
X
18 V tolerant SPI 16-bit/8-bit GPI with INT
PCA9701; PCA9702
[1]
Equation 1
INT output
H
L
L
H
H
© NXP B.V. 2009. All rights reserved.
[2]
is
8 of 28
(1)