AMIS49587C5871G ON Semiconductor, AMIS49587C5871G Datasheet - Page 38

• Manufacturer Part Number: AMIS49587C5871G
• Description: IC MODEM PLC 50/60MHZ 28PLCC
• Manufacturer: ON Semiconductor

Specifications of AMIS49587C5871G

• Baud Rates: Selectable
• Interface: SCI
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 28-PLCC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Format: -

7.3.2 WriteConfig_Request
if the configuration data is correct. Depending on the configuration data, the final state of the MODEM will be Master, Slave
or Monitor.
Table 41. CONFIGURATION PARAMETERS
<STX>
First Initiator MAC Address (FIMA)
Last Initiator MAC Address (LIMA)
Local MAC Address
Active Initiator Address
Time--out--synchro--confirm
Time--out--frame--not--ok
Time--out--not--addressed
Mac--group--addresses
Fs
Fm
R_ZC_ADJUST
Command can be issued at any time (If the status message allows it to be send) and will bring the MODEM in a ‘SET’ state
With Data_Config, 36 bytes of configuration data as laid out in Tables 41 and 43.
0x26 (Length)
Field
External CPU
[Config data error| Command not allowed| Test mode]
[Config data OK&& Command allowed&& !Test mode]
Figure 32. Sequence Diagram for WriteConfig_Request
WriteConfigNew _Request(0x71)
WriteConfigNew _Confirm (0x72)
WriteConfigNew _Error (0x73)
0x71 (WriteConfig_Request)
10 bytes
Length
2 bytes
2 bytes
2 bytes
2 bytes
2 bytes
2 bytes
2 bytes
2 bytes
2 bytes
1 byte
http://onsemi.com
0001 to (FIMA--1)
FIMA to LIMA
FIMA to LIMA
0001 to 0FFF
0001 to 0FFF
0000 to FFFF
0000 to FFFF
0000 to FFFF
0000 to 0FFF
0000 to FFFF
0000 to FFFF
0FFE or
00 to FF
Value
XXXX
XXXX
XXXX
XXXX
XXXX
0000
38
AMIS4958x
Command
Interpreter
Slave: First value for Initiator MAC address
Master & Monitor: don’t care
Slave: Last value for Initiator MAC address
Master & Monitor: don’t care
Slave Mode: New
Slave (Registered)
Master
Monitor
Master, Slave (unlocked)
Slave (locked on an initiator)
Monitor
Slave: In seconds. (Not used in Master mode)
Slave: In seconds (Not used in Master mode)
Slave: In minutes (Not used in Master & Monitor mode)
Monitor: Don’t care
Slave: 5 MAC group addresses (Not used in Master
mode)
Step Register for the Space Frequency Fs
Step Register for the Mark Frequency Fm
Value according to the voltage level of the 50 Hz
information for the input of the PLL.
On success,
mode is changed
to Master, Slave
or Spy
Data_Config
Description
CHK