SI2493-C-FS Silicon Laboratories Inc, SI2493-C-FS Datasheet - Page 17

• Manufacturer Part Number: SI2493-C-FS
• Description: IC ISOMODEM SYSTEM-SIDE 16SOIC
• Manufacturer: Silicon Laboratories Inc

Specifications of SI2493-C-FS

• Mfg Application Notes: SI2493/57/34/15/04, Appl Note AN93
• Data Format: V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92, Bell 103, Bell 212A
• Baud Rates: 56k
• Interface: UART
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 16-SOIC (3.9mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

include a costly LC filter internal to the modem when it
may only be necessary to support a few countries/
customers.
Alternatively, when a billing tone is detected, the host
software may notify the user that a billing tone has
occurred. This notification can be used to prompt the
user to contact the telephone company and have the
billing tones disabled or to purchase an external LC filter.
2.2.16. Billing Tone Filter (Optional)
To operate without degradation during billing tones in
Germany, Switzerland, and South Africa, an external LC
notch filter is required. (The Si3018/10 can remain off-
hook during a billing tone event, but modem data is lost
[or a modem disconnect or retrain may occur] in the
presence of large billing tone signals.) The notch filter
design requires two notches: one at 12 kHz and one at
16 kHz. Because these components are expensive and
few countries supply billing tone support, this filter is
typically placed in an external dongle or added as a
population option for these countries. Figure 7 shows an
example billing tone filter.
L3 must carry the entire loop current. The series
resistance of the inductors is important to achieve a
narrow and deep notch. This design has more than
25 dB of attenuation at 12 and 16 kHz.
FROM
RING
LINE
TIP
Figure 7. Billing Tone Filter
C1
C2
L3
C3
L4
DAA
To
Rev. 0.9
The billing tone filter affects the ac termination and
return loss. The global complex ac termination passes
worldwide return loss specifications with and without the
billing tone filter by at least 3 dB.
2.2.17. PCM Interface (24-Pin TSSOP Only)
Table 7 lists the pin connections for the Si2493/57/34/
15/04 PCM interface. This interface enables Voice
Mode operation. See "3.5. Programming Examples" on
page 105 for additional information.
Symbol
C1,C2
Table 7. PCM Interface Pin Connection
Table 6. Optional Billing Tone Filters
C3
L3
L4
Si24XX Pin
24
18
12
3
4
Component Values
Coilcraft RFB0810-332 or equivalent
Coilcraft RFB0810-103 or equivalent
3.3 mH, >120 mA, <10 Ω, ±10%
10 mH, >40 mA, <10 Ω, ±10%
0.027 µF, 50 V, ±10%
0.01 µF, 250 V, ±10%
Value
Si24XX Signal
CLKOUT
RESET*
FSYNC
SDO
SDI
AN93
17