DLP-2232MSP DLP Design Inc, DLP-2232MSP Datasheet - Page 7

• Manufacturer Part Number: DLP-2232MSP
• Description: Interface Modules & Development Tools USB to MSP430 w/ FTDI FT2232H
• Manufacturer: DLP Design Inc
• Series: -r

Specifications of DLP-2232MSP

• Interface Type: USB
• Data Bus Width: 8 bit
• Description/function: USB Microcontroller Module
• Dimensions: 76.2 mm x 30.5 mm x 5.3 mm
• Number Of Channels: Single
• Operating Supply Voltage: 5 V
• Product: Interface Development Tools
• Supply Current: 500 mA
• Supply Voltage (max): 5 V
• Main Purpose: Interface, USB 2.0 to UART (RS232) Bridge
• Embedded: Yes, MCU, 16-Bit
• Utilized Ic / Part: FT2232H, MSP430F2618
• Primary Attributes: Full Speed USB to High-Speed UART
• Secondary Attributes: Royalty-Free Drivers
• Lead Free Status / Rohs Status: Details
• For Use With/related Products: MSP430F2618

Example:
0x41 – Disable A/D
Length:
Parameters: 0=ADC0, 1=ADC1
Returns:
Function:
Example:
0x42 – Select A/D Input
Length:
Parameters: 0x00=Select input A0 (P6.0)
Returns:
Function:
Example:
0x43 – External Reference
Length:
Parameters: None
Returns:
Function:
Example:
0x44 – Internal Reference
Length:
Parameters: None
Returns:
Function:
Example:
Rev. 1.1 (May 2011)
channel as an A/D input, and 0x43 / 0x44 must have been called to configure the
voltage reference.
0x3, 0x40 0x00 – Performs the A/D conversion and, using ADC0, returns 2 bytes of
data
3 Bytes
1 Byte: command echo acknowledgement=0x41
This function disables the specified A/D converter
0x3, 0x41 0x01 – Disables A/D Converter 1
3 Bytes
0x01=Select input A1 (P6.1)
0x02=Select input A2 (P6.2)
0x03=Select input A3 (P6.3)
0x04=Select input A4 (P6.4)
0x05=Select input A5 (P6.5)
0x06=Select input A6 (P6.6)
0x07=Select input A7 (P6.7)
0x08=Select internal input Veref+
0x09=Select internal input Vref-/Veref-
0x0A=Select internal temperature diode
0x0B=Select internal input (Avcc – Avss)/2
1 Byte: command echo acknowledgement=0x42
This function selects the analog input to be used by the specified A/D converter
0x3, 0x42 0x03 – Selects analog input A3
2 Bytes
1 Byte: command echo acknowledgement=0x43
This function sets the A/D and D/A references to be external
0x2, 0x43 – Select External Voltage Reference
2 Bytes
1 Byte: command echo acknowledgement=0x44
This function sets the A/D and D/A references to be internal; use command 0x50 to
select the Internal Voltage Reference value
0x2, 0x44 – Select Internal Voltage Reference
7
© DLP Design, Inc.