102-B YELLOW TAPESWITCH, 102-B YELLOW Datasheet - Page 3

• Manufacturer Part Number: 102-B YELLOW
• Description: Switch, Do It Yourself Material, Yellow, 12 oz, Finger Press Sensivity
• Manufacturer: TAPESWITCH

Specifications of 102-B YELLOW

• Function: Pressure
• Primary Type: Pressure
• Lead Free Status / Rohs Status: RoHS Exempt Product

Controflex
171-IS (Sleeve End only)
Super moisture resistant
switch with special DRI-RUN
lead and in-line moisture
trap. Replacement switch for
RBMA Road Switch
Insert in RBMA, or fasten to
dry roadbed with 6 in.
(152mm) wide duct tape.
(nominal) 160 oz. (44N) Q
See pg. 6
PVC - Black
solid, 10 ft. (3.05m)
.8 oz./ft. (74.4 g/m)
2 in. (50mm)
1000 VAC for 2 minutes
(Recommended)
28 VAC or VDC at 1.0 A
140 VAC @ 1A
0 °F to 120 °F
(-18 °C to 50 °C)
Non-standard switch lengths.
Non-standard lead lengths.
Air Leak test. FAIL-SAFE
leads. 170-IS Temporary
Road Switch. Same as 171-
IS, but without moisture trap.
AWG #18 stranded to #20
171-IS (Sleeve End only)
(Not recommended)
TAPESWITCH
CORPORATION
151-BBW (Welded end only )
Low profile, very sensitive
switch. Lead wire both ends
for easy series connection of
multiple windows or FAIL-
SAFE connection. Protects
open or closed windows.
May be covered for
concealment.
DA-32 Double adhesive
tape.
(nominal) 8 oz. (2N) Q
See pg. 6
PVC - White
AWG #22, each end,
12 in. (305mm)
.7 oz./ft. (65.1 g/m)
1/8 in. (3mm)
1000 VAC for 2 minutes
(Recommended)
28 VAC or VDC at 1.0 A
140 VAC @ 1A
0 °F to 120 °F
(-18 °C to 50 °C)
Non-standard switch lengths.
Non-standard lead lengths.
Air Leak test.
151-BBW (Welded end only )
100 Schmitt Boulevard
Farmingdale, NY 11735
(Not recommended)
®
Ribbon Switches
Product Selection Guide
180 (Welded end only)
Patented snap action design
operated when flexed at any
point.
DA-32 Double adhesive
tape.
(nominal) 8 oz. (2N) Q
See pg. 6
PVC - Red
AWG #22, 18in. (460mm)
.7 oz./ft. (65.1 g/m)
10° – 15° bend actuates
1000 VAC for 2 minutes
(Recommended)
28 VAC or VDC at 1.0 A
140 VAC @ 1A
0 °F to 120 °F
(-18 °C to 50 °C)
Non-standard switch lengths.
Non-standard lead lengths.
Air Leak test. FAIL-SAFE
leads. Moisture trap.180-S
(orange color). Similar to
180, but more stiff.
180 (Welded end only)
(Not recommended)
Home Page: www.tapeswitch.com
Email: [e-mail]
161-FS (Welded end only)
Rugged rubber sheath
encases special ribbon
switch. May be curved while
flat on floor in 30in. (762mm)
radii. Replacement inserts
available.
Floor tile mastic.
(nominal) 80 oz. (22N) Q
See pg. 6
EPDM - Black
AWG #18, 6 ft.(1.8m)
5 oz./ft. (465 g/m)
Do not bend
1000 VAC for 2 minutes
(Recommended)
28 VAC or VDC at 1.0 A
140 VAC @ 1A
0 °F to 120 °F
(-18 °C to 50 °C)
Non-standard switch lengths.
Non-standard lead lengths.
Air Leak test. FAIL-SAFE
leads. Adhesive backing.
161-FS (Welded end only)
(Not recommended)
Tel: [phone]
Fax: [phone]
107-SLS (No bead)
107-SRS (Bead)
Improved chemical and
moisture resistance through
use of a special jacket.
Improved Temperature
range. All ends RF welded
Channel #104 or DA-32
double adhesive tape.
(nominal) 8 oz. (2N) Q
See pg. 6
Astarex C - Black
107-SLS: .9 oz./ft. (83.7 g/m)
107-SRS: .1oz./ft. (93.0 g/m)
2 in. (50mm)
1000 VAC for 2 minutes
(Recommended)
28 VAC or VDC at 1.0 A
140 VAC @ 1A
0 °F to 120 °F
(-18 °C to 50 °C)
Non-standard switch lengths.
Non-standard lead lengths.
Air Leak test. FAIL-SAFE
leads. Adhesive backing.
AWG #22, 18 in. (460mm)
107-SLS (No bead)
107-SRS (Bead)
(Not recommended)
5