TP-2(2"X2") TAPESWITCH, TP-2(2"X2") Datasheet - Page 3

no-image

TP-2(2"X2")

Manufacturer Part Number
TP-2(2"X2")
Description
Touch Pad; 28; 1 A; 24/2 AWG; Black; 18 in.; -18 degC; 50 degC
Manufacturer
TAPESWITCH
Datasheet

Specifications of TP-2(2"X2")

Color
Black
Current, Rating
1 A
Dimensions
2-1⁄4 in. H x 3⁄8 in. W
Function
Pressure
Length, Wire
18 in.
Primary Type
Pressure
Temperature, Operating, Maximum
50 °C
Temperature, Operating, Minimum
-18 °C
Wire Size
24⁄2 AWG
Lead Free Status / Rohs Status
RoHS Exempt Product
RBMA Vehicle Sensing Switch
High in reliability — Low in cost
The RBMA weatherproof Road Switch is supplied in a steel
mounting channel which has flanges for fastening with
studs, nails or cement. The metal mounting makes the
RBMA suitable for asphalt surfaces as well as concrete
roadways.
This heavy duty road switch operates as a normally open,
momentary switch, making contact when pressed by any
vehicle wheel. When properly installed this switch gives
millions of cycles of performance. Can take the place of
expensive “inductive loop” sensors.
Type RB-S Road Switch
Type RB-S features the same design and functional versatility as the RBMA, except
the steel mounting channel is omitted. May be attached to road surface mechanically
or with an adhesive.
End Protector — C-178
Road switches should be ordered long enough and placed so that the traffic is kept
off ends. If traffic cannot be kept off, use C-178 End Protectors at each end of
switch.
APPLICATIONS:
TAPESWITCH
CORPORATION
• Portable Traffic Control • Vehicle Counting Drive-Ins • Toll Booths • Car Washes
• Private Road Alarms • Factory Safety • Timing Auto Races • Axle Counting
100 Schmitt Boulevard
Farmingdale, NY 11735
Home Page: www.tapeswitch.com
Email: sales@tapeswitch.com
For ground installations, 24 volts or less is recommended.
Pressure sensitivity is 20 lbs. Cross section excluding
flanges is two inches wide by 7/16" thin. Standard lengths:
2 ft., 3 ft., 5 ft., 8 ft., and 10 ft.
171-lS RIBBON SWITCH. This sealed ribbon switch
contactor is available as a replaceable item that slips into
the protective rubber sheath. (Specify length).
Tel: (631) 630-0442
Fax: (631) 630-0454
61

Related parts for TP-2(2"X2")