206 (HDW FOR 100 WATT) Dale / Vishay, 206 (HDW FOR 100 WATT) Datasheet - Page 4

• Manufacturer Part Number: 206 (HDW FOR 100 WATT)
• Description: Hardware, Mounting Bracket, Horizontal, Push-in, 100 watts
• Manufacturer: Dale / Vishay
• Type: Resistor Hardwarer

MATERIAL SPECIFICATIONS
Element: Copper-nickel alloy or nickel-chrome alloy,
depending on resistance value
Core: Ceramic, steatite
Coating: Special high temperature silicone
Standard Terminals: Model “Z” terminals are tinned steel
Terminal Bands: Steel
Part Marking: DALE, Model, Wattage, Value, Tolerance, Date
Code
Document Number: 30208
Revision 10-Sep-04
TEST
Thermal Shock
Short Time Overload
Dielectric Withstanding Voltage
Low Temperature Storage
High Temperature Exposure
Moisture Resistance
Shock, Specified Pulse
Vibration, High Frequency
Load Life
PERFORMANCE
Wirewound Resistors Industrial Power, Tubular (HL), Non-Inductive Tubular (NHL)
CONDITIONS OF TEST
Rated power applied until thermally stable, then a minimum of 15 minutes at - 55°C
10 x rated power for 5 seconds
1,000V rms, 1 minute
- 55°C for 24 hours
250 hours at + 350°C
MIL-STD-202 Method 106, 7b not applicable
MIL-STD-202 Method 213, 100g’s for 6 milliseconds, 10 shocks
Frequency varied 10 to 2,000Hz, 20g peak, 2 directions 6 hours each
1,000 hours at rated power, + 25°C, 1.5 hours “ON”, 0.5 hours “OFF”
Derating
120
100
80
60
40
20
-65 -50
0
For technical questions, contact [e-mail]
0
25
50
NHL NON-INDUCTIVE
Models of equivalent physical and electrical specifications are
available with non-inductive (Aryton-Perry) winding.They are
identified by adding the letter N to the front of the HL type
designation (NHL-225 for example). For NHL models
maximum resistance values are lower, see STANDARD
ELECTRICAL SPECIFICATIONS table.
AMBIENT TEMPERATURE IN
150
250
°
C
350
± (2.0% + 0.05Ω)∆R
± (2.0% + 0.05Ω)∆R
± (0.1% + 0.05Ω)∆R
± (2.0% + 0.05Ω)∆R
± (2.0% + 0.05Ω)∆R
± (2.0% + 0.05Ω)∆R
± (0.2% + 0.05Ω)∆R
± (0.2% + 0.05Ω)∆R
± (3.0% + 0.05Ω)∆R
Vishay Dale
TEST LIMITS
HL, NHL
www.vishay.com
67