ATF16V8C-7SC Atmel, ATF16V8C-7SC Datasheet - Page 7

• Manufacturer Part Number: ATF16V8C-7SC
• Description: IC PLD 7NS 20SOIC
• Manufacturer: Atmel

Specifications of ATF16V8C-7SC

• Programmable Type: EE PLD
• Number Of Macrocells: 8
• Voltage - Input: 5V
• Speed: 7ns
• Mounting Type: Surface Mount
• Package / Case: 20-SOIC (7.5mm Width)
• Family Name: ATF16V8C
• Process Technology: EECMOS
• # Macrocells: 8
• # I/os (max): 8
• Frequency (max): 125MHz
• Propagation Delay Time: 7.5ns
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (min): 4.75V
• Operating Supply Voltage (max): 5.25V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 20
• Package Type: SOIC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: ATF16V8C7SC

0425H–PLD–3/11
11.
12.
Security fuse usage
A single fuse is provided to prevent unauthorized copying of the ATF16V8C fuse patterns. Once programmed, fuse verify
and preload are inhibited. However, the 64-bit user signature remains accessible.
The security fuse will be programmed last, as its effect is immediate.
Input and I/O pin-keeper circuits
The ATF16V8C contains internal input and I/O pin-keeper circuits. These circuits allow each ATF16V8C pin to hold its
previous value even when it is not being driven by an external source or by the device’s output buffer. This helps insure
that all logic array inputs are at known, valid logic levels. This reduces system power by preventing pins from floating to
indeterminate levels. By using pin-keeper circuits rather than pull-up resistors, there is no DC current required to hold the
pins in either logic state (high or low).
These pin-keeper circuits are implemented as weak feedback inverters, as shown in the Input Diagram below. These
keeper circuits can easily be overdriven by standard TTL- or CMOS-compatible drivers. The typical overdrive current
required is 40μA.
Figure 13.
Figure 14.
Input diagram
I/O diagram
Atmel ATF16V8C
7