20-101-0405 Rabbit Semiconductor, 20-101-0405 Datasheet - Page 5

• Manufacturer Part Number: 20-101-0405
• Description: MODULE RABBITCORE RCM2010
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0405

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 2000
• Flash: 256 KBytes
• Operating Supply Voltage: 4.75 to 5.25 V
• Board Size: 58.4 mm x 48.3 mm x 14 mm
• For Use With/related Products: RCM2010
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1084

Throughout this manual, the term RCM2000 refers to the complete series of RCM2000
RabbitCore modules unless other production models are referred to specifically.
The RCM2000 is a core module designed to be the heart of your own controller built
around the plug-in module. Data processing is done by a Rabbit 2000 microprocessor
operating at up to 25.8 MHz (RCM2000 and RCM2010).
The RCM2000 has a Rabbit 2000 microprocessor, a static RAM, a flash memory, two
quartz crystals (main oscillator and timekeeping), and the circuitry necessary for reset and
management of battery backup of the Rabbit 2000’s internal real-time clock and the static
RAM. Two 40-pin headers bring out the Rabbit 2000 I/O bus, address lines, data lines,
parallel ports, and serial ports.
The RCM2000 receives its +5 V power from the user board on which it is mounted. The
RCM2000 can interface will all kinds of digital devices through the user board.
The RCM2000 Development Kit comes with a Prototyping Board that can be used to
demonstrate the operation of the RCM2000 and to prototype new circuits.
1.1 Features
• Small size: 1.90" × 2.30" (48.3 mm × 58.4 mm)
• Microprocessor: Rabbit 2000 running at 25.8 MHz (RCM2000 and RCM2010)
• 40 CMOS-compatible parallel I/O lines grouped in five 8-bit ports (shared with serial
• 8 data lines (D0–D7)
• 13 address lines (A0–A12)
• I/0 read, write, buffer enable
• Status, watchdog and clock outputs
• Two startup mode inputs for master/slave configuration
User’s Manual
ports)
The RabbitCore RCM2000 series is a family of microprocessor
modules designed to be the heart of embedded control systems,
providing an array of I/O and addressing.
1. I
NTRODUCTION
1