CP2-HA110-A1-KR 3M, CP2-HA110-A1-KR Datasheet

PCI Express / PCI Connectors 110P PRESS-FIT HEADR

CP2-HA110-A1-KR

Manufacturer Part Number
CP2-HA110-A1-KR
Description
PCI Express / PCI Connectors 110P PRESS-FIT HEADR
Manufacturer
3M
Series
CP2 Seriesr
Datasheet

Specifications of CP2-HA110-A1-KR

Product Type
PCI
Number Of Positions / Contacts
110
Mounting Angle
Vertical
Mounting Style
Press Fit
Housing Material
Glass Filled Polyester (PBT)
Contact Material
Copper Alloy
Contact Plating
Gold
Board Thickness
2.4 mm to 5.6 mm
Tail Length
3.7 mm
Other names
05111990566 80001203100
3M
2 mm Type A 110 Signal Contacts
Physical
Mechanical
Environmental
PCB Data
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
Recommended PCB Plated Through Hole: Φ 0.6±0.05 mm
Electrical
Mating and Un-mating Operations: 50
CP2 Press-Fit Header
Insulation Resistance: ≥ 10,000 MΩ
Temperature Ratings: -40°C to +85°C
Drill Hole Diameter: Φ 0.7±0.02 mm
Contact Resistance: ≤ 20 mΩ
Withdrawl Force: ≥ 0.15N/PIN
Retention Force: ≥ 13.5N/pin on nominal hole diameter
PCB thickness: 2.4-5.6 mm
Press-In Force: ≤ 204N/pin on nominal hole diameter
Flammability: UL94V-0
Mating Force: ≤ 0.75N/PIN
Hole platings: Cu 25~50 μm, Sn or SnPb<10 μm
Insulation:
Test Voltage: 750 VAC
Contact:
Material: Glass Filled Polyester (PBT)
Material: Copper Alloy
Plating: See Ordering Information
RMS
Date Modified: November 6, 2008
25 mm basic system unit
50 mm module
2 mm grid spacing allows for high signal density at low cost
“Eye of the Needle” compliant pin press-fit design reduces
manufacturing time and cost
Three contact mating levels for Early Mate Late Break or “Hot
Swap” applications reduces manufacturing time and cost
Feed through termination available for midplane applications
Additional grounding rows available for improved ground bounce
and EMI immunity
Mates with 5 row 3M
End to end stackable with 5 row 3M
CP2 headers
See Regulatory Information Appendix (RIA) for chemical
compliance information
For technical, sales or ordering information call
MetPak
3M is a trademark of 3M Company.
HSHM, HM, and CP2 sockets
MetPak
HSHM, HM, and
CP2 Series
800-225-5373
Sheet 1 of 5
TS-2265-B

Related parts for CP2-HA110-A1-KR

CP2-HA110-A1-KR Summary of contents

Page 1

... End to end stackable with 5 row 3M CP2 headers • See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: November 6, 2008 RMS For technical, sales or ordering information call CP2 Series HSHM, HM, and CP2 sockets ™ MetPak HSHM, HM, and ™ ™ TS-2265-B Sheet trademark of 3M Company. ...

Page 2

... CP2 Press-Fit Header ™ Type A 110 Signal Contacts Recommended PCB Layout Ordering Information Loading Configurations (See diagrams on following pages) Grounding Options: G= with ground pins Blank= without ground pins EMLB Patterns Primary Tail Length 1= 3 16.0 mm • This diagram serves only for Part Number descriptive definitions. ...

Page 3

... CP2 Press-Fit Header ™ Type A 110 Signal Contacts CP2-HA110-E1-TG30 CP2-HA110-GE1-TG30 CP2-HA110-A1-TG30 CP2-HA110-GA1-TG30 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects For technical, sales or ordering information call CP2 Series Connector Type A22 Connector Type A22 Connector Type A22 Connector Type A22 TS-2265-B Sheet trademark of 3M Company ...

Page 4

... CP2 Press-Fit Header ™ Type A 110 Signal Contacts CP2-HA110-D1-TG30 CP2-HA110-GB1-TG30 CP2-HA110-GC1-TG30 CP2-HA110-GA4-GG30 Signal Contact Configuration Worksheet Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects CP2 Series Connector Type A22 Connector Type A22 Connector Type A22 Connector Type A22 Connector Type A22 17 18 ...

Page 5

... CP2 Press-Fit Header ™ Type A 110 Signal Contacts CP2-HA110-F1- CP2-HA110-GF1- Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects For technical, sales or ordering information call CP2 Series Connector Type A22 Connector Type A22 TS-2265-B Sheet trademark of 3M Company. 800-225-5373 ...

Page 6

... Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance application that is exempt under EU RoHS. Unless otherwise stated writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. ...

Page 7

... Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance application that is exempt under EU RoHS. Unless otherwise stated writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. ...

Page 8

... INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted ...

Related keywords