EP1S40F1020C6 Altera, EP1S40F1020C6 Datasheet - Page 89

• Manufacturer Part Number: EP1S40F1020C6
• Description: IC STRATIX FPGA 40K LE 1020-FBGA
• Manufacturer: Altera
• Series: Stratix®r

Specifications of EP1S40F1020C6

• Number Of Logic Elements/cells: 41250
• Number Of Labs/clbs: 4125
• Total Ram Bits: 3423744
• Number Of I /o: 773
• Voltage - Supply: 1.425 V ~ 1.575 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 1020-FBGA
• Family Name: Stratix
• Number Of Logic Blocks/elements: 41250
• # I/os (max): 773
• Frequency (max): 450.05MHz
• Process Technology: 0.13um (CMOS)
• Operating Supply Voltage (typ): 1.5V
• Logic Cells: 41250
• Ram Bits: 3423744
• Operating Supply Voltage (min): 1.425V
• Operating Supply Voltage (max): 1.575V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 1020
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant
• Other names: 544-1425; EP1S40SF1020C6

Altera Corporation
July 2005
Figure 2–42. Global Clocking
Note to
(1)
Regional Clock Network
There are four regional clock networks within each quadrant of the Stratix
device that are driven by the same dedicated CLK[15..0] input pins or
from PLL outputs. From a top view of the silicon, RCLK[0..3] are in the
top left quadrant, RCLK[8..11] are in the top-right quadrant,
RCLK[4..7] are in the bottom-left quadrant, and RCLK[12..15] are in
the bottom-right quadrant. The regional clock networks only pertain to
the quadrant they drive into. The regional clock networks provide the
lowest clock delay and skew for logic contained within a single quadrant.
RCLK cannot be driven by internal logic. The CLK clock pins
symmetrically drive the RCLK networks within a particular quadrant, as
shown in
from PLLs and CLK pins.
CLK[3..0]
The corner fast PLLs can also be driven through the global or regional clock
networks. The global or regional clock input to the fast PLL can be driven by an
output from another PLL, a pin-driven global or regional clock, or internally-
generated global signals.
Figure
Figure
2–42:
Global Clock [15..0]
2–43. See
CLK[7..4]
Figures 2–50
Note (1)
CLK[15..12]
Stratix Device Handbook, Volume 1
Global Clock [15..0]
and
2–51
for RCLK connections
Stratix Architecture
CLK[11..8]
2–75