1-1437514-3 TE Connectivity, 1-1437514-3 Datasheet - Page 2

• Manufacturer Part Number: 1-1437514-3
• Manufacturer: TE Connectivity

Specifications of 1-1437514-3

• Socket Style: Standard
• Profile: Zero
• Frame Style: Film Carrier
• Leg Style: Straight
• Proprietary Name: HOLTITE
• Sleeve Finish: Gold
• Contact Resistance (m?): 10
• Contact Rating: 3A
• Termination Post Length (mm [in]): 3.18 [0.125]
• Height Above Pc Board (mm [in]): 0.00 [0.000]
• Centerline (mm [in]): 2.54 [0.100]
• Row-to-row Spacing (mm [in]): 7.62 [0.300]
• Number Of Positions: 1
• Mount Style: Vertical
• Contact Termination Type: Through Hole
• Contact Base Material: Beryllium Copper
• Contact Plating, Mating Area, Material: Gold
• Contact Style: Screw Machine
• Mating Contact Type: Four-Fingered
• Number Of Patterns Per Reel: 1
• Carrier Strip Material: Mylar
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Temperature Range (°c): -55 – +125
• Packaging Method: Reel
• Packaging Quantity: 5,000

3.3.
3.4.
3.5.
Rev B
Examination of product.
Low level contact resistance.
Insulation resistance.
Temperature rise vs current.
Vibration, sinusoidal.
Durability.
Ratings
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per EIA-364.
Test Requirements and Procedures Summary
Test Description
Current: 5 amperes using an .062 inch thick glass epoxy, Type FR4, with 2 ounce copper, plated,
with electroplated (.001 inch minimum) copper and electroplated tin/lead (.0003 inch minimum)
plated through holes.
Temperature:
•
•
Gold contacts: -55 to 125° C
Tin/lead contacts: -55 to 105° C
Meets visual requirements.
10 milliohms maximum initial for
recessed contacts
11 milliohms maximum initial for
flush contacts.
15 milliohms maximum final.
1,000 megohms minimum.
30EC maximum temperature rise at
specified current.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
EIA-364-18.
Visual inspection.
EIA-364-23.
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
See Figure 3.
EIA-364-21.
Test between adjacent contacts on
.100 inch centerlines.
EIA-364-70,
Method 1.
Stabilize at a single current level
until 3 readings at 5 minute
intervals are within 1EC.
EIA-364-28,
Test Condition IV.
Subject mated specimens to 10-
2000-10 Hz traversed in 20 minutes
with 1.5 mm [.06 in] maximum total
excursion or 20 G’s, whichever is
less. 4 hours in each of 3 mutually
perpendicular planes.
EIA-364-9.
Insert and withdraw a .020 inch
diameter polished steel test pin 50
times at a maximum rate of 500
cycles per hour.
Procedure
108-1979
2 of 5