ATS675LSETN-HT-T Allegro, ATS675LSETN-HT-T Datasheet - Page 13

• Manufacturer Part Number: ATS675LSETN-HT-T
• Manufacturer: Allegro

ATS675LSE
5,581,179; 5,517,112; 5,619,137; 5,621,319; 5,650,719; 5,686,894; 5,694,038; 5,729,130; 5,917,320; and other patents pending.
mit improvements in the per for mance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the
information being relied upon is current.
failure of that life support device or system, or to affect the safety or effectiveness of that device or system.
nor for any in fringe ment of patents or other rights of third parties which may result from its use.
Copyright ©2008, Allegro MicroSystems, Inc.
The products described herein are manufactured under one or more of the following U.S. patents: 5,045,920; 5,264,783; 5,442,283; 5,389,889;
Allegro MicroSystems, Inc. reserves the right to make, from time to time, such de par tures from the detail spec i fi ca tions as may be required to per-
Allegro’s products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the
The in for ma tion in clud ed herein is believed to be ac cu rate and reliable. How ev er, Allegro MicroSystems, Inc. assumes no re spon si bil i ty for its use;
24.65±0.10
11.60±0.10
6.23±0.10
3.3±0.1
10.00±0.05
4.9±0.1
1.3±0.1
A
1
For the latest version of this document, visit our website:
Optimized for Automotive Cam Sensing Applications
2
5.50±0.10
1.27±0.10
3
Package SE 4-Pin SIP Module
4
A
1.0 REF
2.00±0.10
1.0 REF
1.60±0.10
0.60±0.10
www.allegromicro.com
F
Branded
Face
0.71±0.10
0.9±0.1
E
Self-Calibrating TPOS Speed Sensor
7.00±0.05
0.71±0.10
0.38
C
+0.06
–0.04
B
E
F
A
B
C
D
For Reference Only, not for tooling use (reference DWG-9001)
Dimensions in millimeters
Dambar removal protrusion (16X)
Metallic protrusion, electrically connected to pin 4 and substrate (both sides)
Thermoplastic Molded Lead Bar for alignment during shipment
Active Area Depth, 0.43 mm
Hall element (not to scale)
Branding scale and appearance at supplier discretion
D
115 Northeast Cutoff
1.508.853.5000; www.allegromicro.com
Allegro MicroSystems, Inc.
Worcester, Massachusetts 01615-0036 U.S.A.
W = Week of manufacture
Standard Branding Reference View
N = Last three numbers of device part number
Y = Last three digits of year of manufacture
L = Lot identifier
= Supplier emblem
LLLLLLL
YYWW
NNN
13