LQ121S1DG31 Sharp Electronics, LQ121S1DG31 Datasheet - Page 3

• Manufacturer Part Number: LQ121S1DG31
• Manufacturer: Sharp Electronics

Specifications of LQ121S1DG31

• Lead Free Status / Rohs Status: Not Compliant

1. Application
2. Overview
include materials protected under copyright of SHARP. Do not reproduce or cause any third party to
reproduce them in any form or by any means, electronic or mechanical, for any purpose in whole or
in part, without the express written permission of SHARP.
transportation(aircraft, trains, automobiles, etc.),rescue and security equipment and various safety
related equipment which require higher reliability and safety, take into consideration that
appropriate measures such as fail-safe functions and redundant system design should be taken.
applications, telecommunication equipment(trunk lines), nuclear power control equipment and
medical or other equipment for life support.
This technical literature applies to color TFT-LCD module, LQ121S1DG31.
These specification sheets are the proprietary product of SHARP CORPORATION ("SHARP) and
The device listed in these technical literature sheets was designed and manufactured for use
in general electronic equipment.
In case of using the device for applications such as control and safety equipment for
Do not use the device for equipment that requires an extreme level of reliability, such as aerospace
SHARP assumes no responsibility for any damage resulting from the use of the device which does
not comply with the instructions and the precautions specified in these specification sheets.
Contact and consult with a SHARP sales representative for any questions about this device.
This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film
Transistor). It is composed of a color TFT-LCD panel, driver ICs, control circuit and power supply
circuit and a backlight unit. Graphics and texts can be displayed on a 800×3×600 dots panel with
262,144 colors by supplying 18 bit data signal (6bit/color), four timing signals, +3.3V/5V DC supply
voltage for TFT-LCD panel driving and supply voltage for backlight.
The TFT-LCD panel used for this module is a low-reflection and higher-color-saturation type.
Therefore, this module is also suitable for the multimedia use. Viewing angle is 6 o’clock direction.
This module is the type of wide viewing angle and high brightness(300cd/m
Backlight-driving DC/AC inverter is not built in this module.
2
).
LD-12204-1