LQ150X1LG55 Sharp Electronics, LQ150X1LG55 Datasheet - Page 21

• Manufacturer Part Number: LQ150X1LG55
• Manufacturer: Sharp Electronics

Specifications of LQ150X1LG55

• Lead Free Status / Rohs Status: Compliant

12. Packing form
t) Be careful when using it for long time with fixed pattern display as it may cause afterimage.
u) Adjusting volume have been set optimally before shipment, so do not change any adjusted value.
w)The lamp used for this product is very sensitive to the temperature.
x) In case of operating under lower temp environment, the lamp exhaustion is accelerated
v) If a minute particle enters in the module and adheres to an optical material, it may cause display
（When using it outdoors and ON/OFF is repeated frequently）
In case of such usage under lower temp environment, periodical lamp check and exchange is recommended.
（ Please use a screen saver etc., in order to avoid an afterimage. ）
If adjusted value is changed, the specification may not be satisfied.
Luminance decreases rapidly when it is used for a long time or repeatedly under the environment of the
low temperature or the module is being cooled.
Please avoid the continuous or repeating use of it under such an environment.
It may decrease up to 50% of the initial luminance in about one month under the low temperature
environment.
Please consult our company when it is used under the environment like the above mentioned.
and the brightness becomes lower.(Continuous operating for around 1 month under lower temp
condition may reduce the brightness to half of the original brightness.)
The life of a lamp is accelerated when using it in the environment where a lamp cannot get warm easily.
non-uniformity issue, etc. Therefore, fine-pitch filters have to be installed to cooling and inhalation hole if
you intend to install a fan.
Product countries / Areas
Piling number of cartons
Package quantity in one carton
Carton size(TYP)
Total mass of one carton filled
Packing form is shown
with full modules
JAPAN , TAIWAN, CHINA
434 x 395 x 338
13Kg(TYP)
10pcs
Fig.4
6
LD19512C-18