2106946-5 TE Connectivity, 2106946-5 Datasheet - Page 3

• Manufacturer Part Number: 2106946-5
• Description: Solderless LED Socket
• Manufacturer: TE Connectivity
• Type: Wire to Boardr

Specifications of 2106946-5

• Holder Type: Socket
• No. Of Leds: 1
• External Length: 38.5mm
• Holder Material: Thermoplastic
• Accessory Type: LED Socket
• Rohs Compliant: Yes
• Product: Socket Connectors
• Mounting Style: Wire Connection
• Termination Style: Snap In
• Contact Plating: Silver
• Contact Material: Copper Alloy
• Housing Material: Thermoplastic
• Current Rating: 500 mA
• Voltage Rating: 30 VDC
• Height: 6.5 mm
• Length: 38.5 mm
• Number Of Positions: 6
• Width: 27.5 mm
• Product Type: Socket
• Product Series: CM
• Termination Method To Wire/cable: 6 Conductor AMP Mini CT Connector
• Operating Voltage (vdc): 30
• Current, Maximum (ma): 500
• Socket Type: LED to Inverted Wire
• Optics Latch: Without
• Contact Base Material: Copper Alloy
• Contact Plating, Mating Area, Material: Silver
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Application: Termination for Cree XLamp® MP-L™ LED
• For Use With: Cree XLamp MP-L LED's
• Lead Free Status / Rohs Status: Details

Mechanical shock.
Durability.
Mating force.
Unmating force.
Thermal shock.
Humidity/temperature cycling.
Temperature life.
Rev O4
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
40 N maximum.
7 N minimum.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
EIA-364-27, Method H.
Subject mated specimens to 30 G's
half-sine shock pulses of 11
milliseconds duration. Three shocks
in each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 4.
EIA-364-9.
Mate and unmate specimens for 10
cycles at a maximum rate of 500
cycles per hour.
EIA-364-13.
Measure force necessary to mate
specimens at a maximum rate of
12.7 mm per minute.
EIA-364-13.
Measure force necessary to unmate
specimens at a maximum rate of
12.7 mm per minute.
EIA-364-32, Test Condition VIII.
Subject specimens to 25 cycles
between -40 and 105°C with 30
minute dwells at temperature
extremes and 1 minute transition
between temperatures.
EIA-364-31, Method III.
Subject specimens to 10 cycles (10
days) between 25 and 65°C at 80 to
100% RH.
EIA-364-17, Method A, Test
Condition 4.
Subject mated specimens to 105°C
for 548 hours.
Procedure
108-2439
3 of 6