DS1669-50+ Maxim Integrated Products, DS1669-50+ Datasheet - Page 3

• Manufacturer Part Number: DS1669-50+
• Description: IC RHEOSTAT DALLASTAT 50K 8-DIP
• Manufacturer: Maxim Integrated Products
• Series: Dallastat™r

Specifications of DS1669-50+

• Taps: 64
• Resistance (ohms): 50K
• Number Of Circuits: 1
• Temperature Coefficient: 750 ppm/°C Typical
• Memory Type: Non-Volatile
• Interface: Contact Closure
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Through Hole
• Package / Case: 8-DIP (0.300", 7.62mm)
• Resistance In Ohms: 50K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Supply: -

DS1669
Dual pushbutton mode of operation is entered when the DC input is floated on power-up. If interfacing
contact closure control inputs to digital logic, the DC input must be interfaced to an open drain drive
which is high impedance during power-up; see Figure 2B. This will prevent the device from entering a
single pushbutton mode of operation.
In dual pushbutton mode, each direction is controlled by the up contact (UC) and down contact (DC)
inputs, respectively. No wait states are required to change wiper direction in dual pushbutton mode. In
dual pushbutton mode, as the wiper position reaches the end of the potentiometer, the direction of wiper
movement will not change. Wiper position will remain at the potentiometers’ end until an opposite
direction input is given.
All contact closure control inputs, UC, DC, and D, are internally pulled-up by a 100 kW resistance. The
UC and DC inputs are internally debounced and require no external components for input signal
conditioning.
3 of 10