DS1305EN+ Maxim Integrated Products, DS1305EN+ Datasheet - Page 4

• Manufacturer Part Number: DS1305EN+
• Description: IC RTC SERIAL ALARM IND 20-TSSOP
• Manufacturer: Maxim Integrated Products
• Type: Clock/Calendar/Alarmr

Specifications of DS1305EN+

• Memory Size: 96B
• Time Format: HH:MM:SS (12/24 hr)
• Date Format: YY-MM-DD-dd
• Interface: SPI, 3-Wire Serial
• Voltage - Supply: 2 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 20-TSSOP
• Function: Clock/Calendar/Alarm
• Rtc Memory Size: 96 Byte
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Rtc Bus Interface: Serial (3-Wire, SPI)
• Supply Current: 1.28 mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIN DESCRIPTION (continued)
OPERATION
The block diagram in Figure 1 shows the main elements of the serial alarm RTC. The following
paragraphs describe the function of each pin.
Figure 1. BLOCK DIAGRAM
DIP
12
13
14
15
16
PIN
TSSOP
15
16
17
18
20
NAME
V
SDO
V
SDI
PF
CCIF
CC1
Serial Data Input. When SPI communication is selected, the SDI pin is the
serial data input for the SPI bus. When 3-wire communication is selected, this
pin must be tied to the SDO pin (the SDI and SDO pins function as a single I/O
pin when tied together).
Serial Data Output. When SPI communication is selected, the SDO pin is the
serial data output for the SPI bus. When 3-wire communication is selected, this
pin must be tied to the SDI pin (the SDI and SDO pins function as a single I/O
pin when tied together).
Interface Logic Power-Supply Input. The V
SDO and PF output pins to a level that is compatible with the interface logic,
thus allowing an easy interface to 3V logic in mixed supply systems. This pin is
physically connected to the source connection of the p-channel transistors in
the output buffers of the SDO and PF pins.
Active-Low Power-Fail Output. The PF pin is used to indicate loss of the
primary power supply (V
the PF pin is driven low.
Primary Power Supply. DC power is provided to the device on this pin.
COUNTDOWN CHAIN
OSCILLATOR AND
4 of 22
CC1
). When V
FUNCTION
CC1
is less than V
CCIF
pin allows the DS1305 to drive
1Hz
CC2
or is less than V
BAT
,