LMX2531LQ1742/NOPB National Semiconductor, LMX2531LQ1742/NOPB Datasheet - Page 6

• Manufacturer Part Number: LMX2531LQ1742/NOPB
• Description: IC PLL FREQ SYNTH W/VCO 36-LLP
• Manufacturer: National Semiconductor
• Series: PowerWise®r
• Type: Clock/Frequency Synthesizer (RF)r

Specifications of LMX2531LQ1742/NOPB

• Pll: Yes
• Input: Clock
• Output: CMOS
• Number Of Circuits: 1
• Ratio - Input:output: 2:2
• Differential - Input:output: No/No
• Frequency - Max: 1.866GHz
• Divider/multiplier: Yes/No
• Voltage - Supply: 2.8 V ~ 3.2 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 36-LLP
• Frequency-max: 1.86GHz
• Number Of Elements: 1
• Supply Current: 46mA
• Pll Input Freq (min): 5MHz
• Pll Input Freq (max): 80MHz
• Operating Supply Voltage (typ): 3V
• Operating Temp Range: -40C to 85C
• Package Type: LLP EP
• Output Frequency Range: 1760 to 1866MHz
• Operating Supply Voltage (min): 2.8V
• Operating Supply Voltage (max): 3.2V
• Operating Temperature Classification: Industrial
• Pin Count: 36
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: LMX2531LQ1742TR

www.national.com
Ftest/LD
OSCin*
R2pLF
OSCin
Pin(s)
CPout
Vtune
Fout
CE
As with the CLK, DATA, and LE pins, level shifting may be required if the output voltage of the microcontroller is too high.
A resistive divider or a series diode are two ways to accomplish this. The diode has the advantage that no current flows
through it when the chip is powered down.
It is an option to use the lock detect information from this pin.
This is the high frequency output. This needs to be AC coupled, and matching may also be required. The value of the DC
blocking capacitor may be changed, depending on the output frequency.
In most cases, it is sufficient to short these together, although there always the option of adding additional poles. C1_LF,
C2_LF, and R2_LF are used in conjunction with the internal loop filter to make a fourth order loop filter.
This is the fastlock resistor, which can be useful in many cases, since the spurs are often better with low charge pump
currents, and the internal loop filter can be adjusted during fastlock.
This is the reference oscillator input pin. It needs to be AC coupled.
If the device is being driven single-ended, this pin needs to be shunted to ground with a capacitor.
Application Information
6