5962-90555033A QP SEMICONDUCTOR, 5962-90555033A Datasheet - Page 11

• Manufacturer Part Number: 5962-90555033A
• Manufacturer: QP SEMICONDUCTOR

Specifications of 5962-90555033A

• Lead Free Status / RoHS Status: Supplier Unconfirmed

DSCC FORM 2234
APR 97
appendix A.
devices prior to quality conformance inspection. The following additional criteria shall apply:
4. VERIFICATION
4.1 Sampling and inspection. Sampling and inspection procedures shall be in accordance with MIL-PRF-38535,
4.2 Screening. Screening shall be in accordance with method 5004 of MIL-STD-883, and shall be conducted on all
b.
a.
(1) Test condition C or D. The test circuit shall be maintained by the manufacturer under document revision level
(2) T
Interim and final electrical test parameters shall be as specified in table II herein, except interim electrical parameter
tests prior to burn-in are optional at the discretion of the manufacturer.
DEFENSE SUPPLY CENTER COLUMBUS
Burn-in test, method 1015 of MIL-STD-883.
control and shall be made available to the preparing or acquiring activity upon request. The test circuit shall
specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified
in method 1015 of MIL-STD-883.
A
MICROCIRCUIT DRAWING
= +125°C, minimum.
COLUMBUS, OHIO 43218-3990
STANDARD
Interim electrical parameters
Final electrical test parameters
Final electrical test parameters
Group A test requirements
Groups C and D end-point
1/ * indicates PDA applies to subgroups 1 and 7.
2/ Any or all subgroups may be combined when using high-speed testers.
3/ ** see 4.3.1c.
4/ Subgroups 7 and 8 functional tests shall also verify that no cells
MIL-STD-883 test requirements
(method 5004)
(method 5004) for
unprogrammed devices
(method 5004) for
programmed devices
(method 5005)
electrical parameters
(method 5005)
are programmed for unprogrammed devices or that the altered item
drawing pattern exists for programmed devices.
TABLE II. Electrical test requirements. 1/ 2/ 3/ 4/
MIL-STD-883, method 5005,
1
1*, 2, 3, 7*, 8A, 8B
1*, 2, 3, 7*, 8A, 8B, 9
1, 2, 3, 4**, 7,
8A, 8B, 9, 10, 11
2, 3, 7, 8A, 8B
(in accordance with
SIZE
A
Subgroups
table I)
REVISION LEVEL
B
SHEET
5962-90555
11