BTS5662EXT Infineon Technologies, BTS5662EXT Datasheet - Page 24

• Manufacturer Part Number: BTS5662EXT
• Manufacturer: Infineon Technologies

Specifications of BTS5662EXT

• Switch Type: High Side
• Input Voltage: -0.3 to 8V
• Power Switch On Resistance: Ohm
• Number Of Outputs: 6
• Mounting: Surface Mount
• Supply Current: 12mA
• Package Type: DSO
• Operating Temperature (min): -40C
• Operating Temperature (max): 150C
• Operating Temperature Classification: Automotive
• Pin Count: 36
• Lead Free Status / RoHS Status: Supplier Unconfirmed

7.4
In addition to the output clamp for inductive loads as described in
available for over voltage protection. The current through the ground connection has to be limited during over
voltage. Please note that in case of over voltage the pin GND might have a high voltage offset to the module
ground.
7.5
In case of complete loss of the device ground connections, but connected load ground, the SPOC - BTS5662E
securely changes to or stays in off-state.
7.6
In case of loss of
ground connection or through an additional path from
reverse polarity reason, the ground connection is not available for demagnetization. Then for example, a resistor
can be placed in parallel to the diode or a suppressor diode can be used between
Data Sheet
Over Voltage Protection
Loss of Ground
Loss of
V
BB
connection in on-state, all inductances of the loads have to be demagnetized through the
V
BB
V
24
BB
to ground. When a diode is used in the ground path for
Section
6.3, there is a clamp mechanism
V
BB
and GND.
SPOC - BTS5662E
Protection Functions
Rev. 1.0, 2008-01-22