IRM-2638 Everlight Electronics CO., LTD, IRM-2638 Datasheet - Page 4

no-image

IRM-2638

Manufacturer Part Number
IRM-2638
Description
RECEIVER MOD IR REMOTE
Manufacturer
Everlight Electronics CO., LTD
Datasheet

Specifications of IRM-2638

Peak Wavelength
940nm
Operating Supply Voltage (typ)
5V
Operating Supply Voltage (min)
4.5V
Operating Supply Voltage (max)
5.5V
Operating Temperature Classification
Commercial
Lead Free Status / RoHS Status
Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
IRM-2638
Quantity:
1 000
Part Number:
IRM-2638-DIP-A
Manufacturer:
EVERLIGH
Quantity:
40 000
Part Number:
IRM-2638-E
Manufacturer:
EVERLIGH
Quantity:
40 000
Part Number:
IRM-2638A
Manufacturer:
EVERLIGH
Quantity:
40 000
Part Number:
IRM-2638B
Manufacturer:
EVERLIGH
Quantity:
40 000
The Notice of Application:
Transmission o remote control signal consist of four parts: Encode Part, IR Transmitter Source,
IRM device, Decode Part
If the above items hardly assure of its application, it’ll cause NG(no good) message from the edge
of signal.
Test Method:
OUTPUT WAVE FORM
The specified electro-optical characteristics is satisfied under the following
Conditions at the controllable distance.
IR TANSMITTER
Everlight Electronics Co., Ltd.
Device No:SZDMO-026-041
Fig.-1 Transmitter Wave Form
Measurement place
External light
Standard transmitter
Measuring system
1. When IRM-26xx code select frequency, it need to well understand the center system of
2. Strong or weak light of IR Transmitter can affect distance of transmission.
3. Minimum Burst Length Tburst (number of pulses per burst) : 10 cycles
4. It needs to ensure the translation range of decode part if it is applied to the pulse-width range.
A place that is nothing of extreme light reflected in the room.
Project the light of ordinary white fluorescent lamps which are not high
Frequency lamps and must be less then 10 Lux at the module surface.
(Ee≦10Lux)
A transmitter whose output is so adjusted as to Vo=400mVp-p and the output
Wave form shown in Fig.-1.According to the measurement method shown in
Fig.-2 the standard transmitter is specified.
However , the infrared photodiode to be used for the transmitter should be
λp=940nm,∆λ=50nm. Also, photodiode is used of PD438B(Vr=5V).
According to the measuring system shown in Fig.-3
encode part.
center frequency of each product.
Carrier frequency is adjusted to
EVERLIGHT ELECTRONICS CO.,LTD.
http:\\www.everlight.com
Prepared date:20-Aug-2006
Duty=0.5
OUTPUT PULSE
OF DEVICE
D.U.T output Pulse
Rev 1
IRM-26xx SERIES
Prepared by:HYPENG
Page: 4 of 9

Related parts for IRM-2638