SSM2602CPZ-REEL7 Analog Devices Inc, SSM2602CPZ-REEL7 Datasheet - Page 13

• Manufacturer Part Number: SSM2602CPZ-REEL7
• Description: ANASSM2602CPZ-REEL7 LOW POWER CLASSD AUD
• Manufacturer: Analog Devices Inc

Specifications of SSM2602CPZ-REEL7

• Single Supply Voltage (typ): 3.3V
• Single Supply Voltage (min): 1.5/1.8V
• Single Supply Voltage (max): 3.6V
• Package Type: LFCSP EP
• Lead Free Status / RoHS Status: Compliant

AUTOMATIC LEVEL CONTROL (ALC)
The SSM2602 codec has an automatic level control (ALC) that
can be activated to suppress clipping and improve dynamic
range even if a sudden, loud input signal is introduced. This is
achieved by continuously adjusting the PGA gain so that the
signal level at the ADC input remains constant.
Decay (Gain Ramp-Up) Time
Decay time is the time taken for the PGA gain to ramp up to
90% of its range. The time for the recording level to return to its
target value, therefore, depends on both the decay time and the
gain adjustment required. If the gain adjustment is small, the
time to return to the target value will be less than the decay time.
Attack (Gain Ramp-Down) Time
Attack time is the time taken for the PGA gain to ramp down
through 90% of its range. The time for the recording level to
INPUT SIGNAL
SIGNAL
AFTER
PGA
ALC
Figure 18. PGA and ALC Decay Time and Attack Time Definitions
DECAY TIME
Rev. 0 | Page 13 of 32
return to its target value, therefore, depends on both the attack
time and the gain adjustment required. If the gain adjustment is
small, the time to return to the target value will be less than the
attack time.
Noise Gate
When the ALC function is enabled but the input signal is silent
for long periods, an audible hissing sound may be introduced by a
phenomenon called noise pumping. To prevent this occurrence, the
SSM2602 employs a noise gate function. A user-selected threshold
can be set by using the NGTH bits (Register R18, Bit D3 to Bit D7).
When the noise gate is enabled, the ADC output is either muted or
held at a constant gain to prevent the noise-pumping phenomenon.
For more information about the noise gate settings, see Table 42.
ATTACK TIME
ALC TARGET
VALUE
SSM2602