PEB3265HV15XT Lantiq, PEB3265HV15XT Datasheet - Page 190

• Manufacturer Part Number: PEB3265HV15XT
• Manufacturer: Lantiq

Specifications of PEB3265HV15XT

• On-hook Transmission: Yes
• Polarity Reversal: Yes
• On-chip Ring Relay Driver: Yes
• Operating Supply Voltage (typ): 3.3V
• Operating Temp Range: -40C to 85C
• Package Type: MQFP
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Operating Supply Voltage (max): 3.465V
• Operating Supply Voltage (min): 3.135V
• Lead Free Status / RoHS Status: Compliant

Preliminary
Bit
HIR
HIT
SLEEP-EN Enables Sleep mode of the DuSLIC channel. Valid only in the Power Down
REVPOL Reverses the polarity of DC feeding
Data Sheet
15
H
BCR1
This bit modifies different basic modes. In ringing mode an unbalanced
ringing on the RING wire (ROR) is enabled. In active mode, high impedance
on the RING wire is activated (HIR). If the HIT bit is set in addition to the HIR
bit, the HIRT mode is activated.
HIR = 0
HIR = 1
This bit modifies different basic modes. In ringing mode an unbalanced
ringing on the TIP wire (ROT) is enabled. In active mode, high impedance on
the TIP wire is performed (HIT).If the HIR bit is set in addition to the HIT bit,
the HIRT mode is activated.
HIT = 0
HIT = 1
REVPOL = 0
REVPOL = 1
HIR
7
mode of the SLICOFI-2.
SLEEP-EN = 0
SLEEP-EN = 1
Basic Configuration Register 1
HIT
6
Normal operation (ringing mode).
Controls SLIC-E/-E2/-P interface and sets the RING wire
to high impedance (active mode).
Normal operation (ringing mode).
Controls SLIC-E/-E2/-P interface and sets the TIP wire to
high impedance (active mode).
Normal polarity.
Reverse polarity.
SLEEP-
Sleep mode is disabled.
Sleep mode is enabled.
SLICOFI-2x Command Structure and Programming
EN
5
REVPOL ACTR
190
4
3
ACTL
2
00
DuSLIC-E/-E2/-P
H
SEL-SLIC[1:0]
1
2000-07-14
0
Y