C702 10M008 1214 Amphenol, C702 10M008 1214 Datasheet - Page 8

• Manufacturer Part Number: C702 10M008 1214
• Manufacturer: Amphenol
• Type: Smart Cardr

Specifications of C702 10M008 1214

• Ejector Type: Pushmatic
• Gender: HDR
• Mounting Style: Through Hole
• Termination Method: Solder
• Body Orientation: Right Angle
• Contact Pitch (mm): 2.54mm
• Number Of Contact Rows: 2
• Number Of Contacts: 16POS
• Operating Temp Range: -25C to 85C
• Insertion Force: 12
• Product Height (mm): 6.4mm
• Product Depth (mm): 50.1mm
• Product Length (mm): 64.5mm
• Contact Pitch: 2.54mm
• Lead Free Status / RoHS Status: Compliant

C700 Smart Card Connectors: General Information
Contact Methods
Landing Contacts
With this contact method a moveable contact set will
connect with the pads of the chip card upon insertion of
the card.
The card plastic surface is not scratched and high
mating cycles can be achieved.
Wiping Contacts
The contact set is fixed. When the card is inserted, it
wipes over the data contacts until they arrive at the card
pads. Depending upon the card surface, wiping traces
which do not influence the card function can occur after
some insertion cycles.
The advantage of wiping contacts is that they clean the
contact point with every mating cycle.
Landing Card
This method of contacting is based on a fixed contact
set. The chip card is lowered during its insertion.
The contact areas of the chip card land smoothly on the
reading contacts which results in the possibility of a high
number of mating cycles.
In addition this system makes sure that with each inser-
tion the contact surfaces are cleaned.
8