MAX2165ETI+ Maxim Integrated Products, MAX2165ETI+ Datasheet - Page 14

• Manufacturer Part Number: MAX2165ETI+
• Description: RF Receiver Low power, zero-IF t uner for mobile TV F
• Manufacturer: Maxim Integrated Products

Specifications of MAX2165ETI+

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Single-Conversion DVB-H Tuner
Table 13. DC Offset Control Register (Address: 0x0B)
Table 14. DC Offset DAC Register (Address: 0x0C)
Table 15. ROM Table Address Register (Address: 0x0D)
Table 16. Reserved Register (Address: 0x0E)
14
DC_DAC[7:0]
DC_MO[1:0]
DC_TH[1:0]
DC_SP[1:0]
______________________________________________________________________________________
BIT NAME
BIT NAME
BIT NAME
BIT NAME
DC_DAC8
TFA[3:0]
X
X
X
BIT LOCATION
BIT LOCATION
BIT LOCATION
BIT LOCATION
(0 = LSB)
(0 = LSB)
(0 = LSB)
(0 = LSB)
5, 4
3, 2
1, 0
7–0
7–4
3–0
7–0
7
6
Reserved. Set to 0 for normal operation.
Most significant bit of the DC offset correction DAC.
Controls the DC offset correction mode of operation:
00 = Offset correction disabled.
01, 10 = I/Q channel DC correction DACs are programmed direct from the DC_DAC[8:0]
bits for manual offset correction.
11 = Normal operation.
Controls the DC offset correction speed (highpass corner frequency):
00 = Offset correction off, hold DAC values.
01 = Select correction speed 1 (slowest correction speed, ~20Hz highpass corner).
10 = Select correction speed 2.
11 = Select correction speed 3 (fastest correction speed, ~500Hz highpass corner).
Control the DC offset correction accuracy thresholds:
00 = Not recommended.
01 = Keep typical DC offset to within ±100mV.
10 = Keep typical DC offset to within ±200mV.
11 = Keep typical DC offset to within ±400mV.
Programs the I/Q DC offset DAC for manual DC offset correction. Note the MSB,
DC_DAC8, is located in the DC Offset Control register.
Reserved. Set to 0000 for normal operation.
Programs which ROM table address that data is to be read from (see Table 21):
0001 = Tracking filter notch coefficients for 783MHz and 725MHz.
0010 = Balun coefficients for 470MHz and 780MHz.
0011 = Baseband filter bandwidth settings for 7MHz and 8MHz channels.
All other codes = Reserved.
Reserved. Set to 0x00 for normal operation.
FUNCTION
FUNCTION
FUNCTION
FUNCTION