PE4150MLAB-Z Peregrine Semiconductor, PE4150MLAB-Z Datasheet - Page 4

no-image

PE4150MLAB-Z

Manufacturer Part Number
PE4150MLAB-Z
Description
IC MOSFET MIXER QUAD 20-QFN
Manufacturer
Peregrine Semiconductor
Series
UltraCMOS™r
Datasheet

Specifications of PE4150MLAB-Z

Rf Type
General Purpose
Frequency
136MHz ~ 941MHz
Number Of Mixers
1
Secondary Attributes
Up/Down Converter
Current - Supply
8mA
Voltage - Supply
2.9 V ~ 3.1 V
Package / Case
*
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
1046-1037-2
PE4150MLI-Z

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PE4150MLAB-Z
Manufacturer:
PEREGRI
Quantity:
1 217
Part Number:
PE4150MLAB-Z
Manufacturer:
PEREGRI
Quantity:
563
Part Number:
PE4150MLAB-Z
Manufacturer:
Peregrine
Quantity:
5 000
PE4150
Product Specification
Evaluation Kit
Figure 4. Evaluation Board Layout
Peregrine Specification 101-0201-00A
The Mixer Evaluation Kit board was designed to
ease customer evaluation of the PE4150 Quad
MOSFET Mixer with integrated LO amplifier.
The RF and IF ports are connected through
50ohm transmission lines and 1:4 transmission
line transformers to J5 and J7, respectively. The
LO ports are connected through 50
transmission lines to J4 and J6, respectively, and
can support either a single-ended or differential
signal drive. With a single-ended input, no
termination is needed on the un-used port.
The board is constructed of a two metal layer FR4
with a total thickness of 0.062". The bottom layer
provides ground for the RF transmission lines.
The transmission lines were designed using a
coplanar waveguide with ground plane model
using a trace width of 0.037", trace gaps of 0.008",
dielectric thickness of 0.059" and metal thickness
of 0.0015".
J3 provides an optional external DC bias that can
be applied to the LO input, if there is DC
component to the applied RF input. To use this
option, transformers T2 and T3 must be carefully
chosen to allow the use of a non-zero common-
mode level.
J9 can be used to enable or disable the part. The
chip enable/EN is active low.
De-coupling capacitors are provided on the V
DD
traces. These capacitors should be placed as
close to the DV
pin as possible.
DD
©2010 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0242-06
UltraCMOS™ RFIC Solutions
Page 4 of 10

Related parts for PE4150MLAB-Z