D203-8N KLEIN TOOLS, D203-8N Datasheet - Page 6

• Manufacturer Part Number: D203-8N
• Description: Tools, Long-Nose Plier
• Manufacturer: KLEIN TOOLS

Specifications of D203-8N

• Handle Color: Yellow
• Overall Length: 214mm
• Body Material: Steel
• Jaw Length: 59mm
• Plier Style: Side Cutting Long Nose
• Lead Free Status / RoHS Status: na

74
Insulated Stripper/Cutters
Insulated Wire Stripper/Cutter
Additional Features:
•
•
•
•
•
•
•
Insulated Wire Stripper/Cutter
Additional Features:
•
•
•
•
•
•
Insulated Screwdrivers and Nut Drivers
All dimensions are in inches and (millimeters).
Cat.No.
Cat.No.
All dimensions are in inches and (millimeters).
11045-INS
11049-INS
11055-INS
before use. Do not use if orange coating cracks, breaks or becomes dam-
aged. Destroy tool if white layer shows through orange layer.
equipment prior to working on or around them. Klein insulated tools
are designed only to reduce the chance of injury where the tool may
make contact with an energized source.
national 1000-volt rating symbol shown below, if there is any chance
that the tools will make contact with an
energized source.
national 1000-volt rating symbol shown below, if there is any chance
energized source.
that the tools will make contact with an
Features:
Individually dielectrically tested.
Gauges, cuts, strips, and loops wire.
Spring-loaded for self-opening.
Compact, lightweight wire-stripping, cutting tool.
Narrow nose fits into tight places.
Do not use for cutting steel wire or bolts.
Hardened spring steel with precision-ground
stripping holes for easy removal of insulation.
Individually tested to exceed standards.
Cuts, strips, loops and gauges both solid and stranded wire.
Spring-loaded for self-opening.
Serrated nose for easy bending, shaping
and pulling of wire.
Cleanly shears 6-32 and 8-32 scews.
Do not use for cutting steel wire.
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
Custom,
US-made
tool steel.
Overall Length
8" (203 mm)
Do NOT use screwdrivers to pry or chisel.
Only use tools that are marked with the official inter-
Only use tools that are marked with the official inter-
Wear approved eye protection. Always inspect your tools
Whenever possible, always de-energize lines and
Overall Length
7" (178 mm)
7" (178 mm)
Klein insulated tools exceed
the IEC 60900 and ASTM F1505
standards,
and are clearly marked with the
official 1000-volt rating symbol.
Strips and Cuts
10, 12, 14, 16, 18 AWG solid
12, 14, 16, 18, 20 AWG stranded
Strips and Cuts
10, 12, 14, 16, 18 solid AWG (4.0 mm
8, 10, 12, 14, 16 stranded AWG (6.0 mm
for insulated tools,
Two layers of insulation
provide protection against
electric shock.
Handle Color
orange
2
, 2.5 mm
2
, 4.0 mm
®
tive object when either might contact an energized source.
equipment prior to working on or around them. Klein insulated tools
are designed only to reduce the chance of injury where the tool may
make contact with an energized source.
conductive, Klein insulated tools must be kept clean, dry, and free of any
surface contaminants.
2
conductive object when either might contact an energized source.
before use. Do not use if orange coating cracks, breaks or becomes
damaged. Destroy tool if white layer shows through orange layer.
nants are conductive, Klein insulated tools must be kept clean, dry,
and free of any surface contaminants.
, 1.5 mm
Weight (lbs.)
.75
2
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
, 2.5 mm
2
, 1.0 mm
2
, 1.5 mm
Patented Tip-Ident ®
Do NOT touch uninsulated portion of the tool or any conduc-
Whenever possible, always de-energize lines and
Because moisture, films, or other surface contaminants are
Do NOT touch uninsulated portion of the tool or any
Wear approved eye protection. Always inspect your tools
Because moisture, films, or other surface contami-
quickly identifies nut
2
, 0.75 mm
2
, 1.0 mm
2
)
2
)
driver size.
Handle Color
orange
orange
11055-INS
11049-INS
Weight (lbs.)
.70
.70