SJA1000TD-T NXP Semiconductors, SJA1000TD-T Datasheet - Page 29

• Manufacturer Part Number: SJA1000TD-T
• Description: Network Controller & Processor ICs STAND ALONE CAN CONTROLLER
• Manufacturer: NXP Semiconductors

Specifications of SJA1000TD-T

• Product: Controller Area Network (CAN)
• Number Of Transceivers: 1
• Data Rate: 1 Mbps
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4.5 V
• Supply Current (max): 15 mA
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Package / Case: SO
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: SJA1000T/N1,118

Philips Semiconductors
5. The abort transmission bit is used when the CPU requires the suspension of the previously requested transmission,
6. If the transmission request was set to logic 1 in a previous command, it cannot be cancelled by setting the
6.4.5
The content of the status register reflects the status of the CAN controller. The status register appears to the CPU as a
read only memory.
Table 14 Bit interpretation of the status register (SR); CAN address 2
2000 Jan 04
SR.7
SR.6
SR.5
SR.4
SR.3
SR.2
Stand-alone CAN controller
e.g. to transmit a more urgent message before. A transmission already in progress is not stopped. In order to see if
the original message has been either transmitted successfully or aborted, the transmission complete status bit
should be checked. This should be done after the transmit buffer status bit has been set to logic 1 or a transmit
interrupt has been generated.
It should be noted that a transmit interrupt is generated even if the message was aborted because the transmit buffer
status bit changes to ‘released’.
transmission request bit to logic 0. The requested transmission may be cancelled by setting the abort transmission
bit to logic 1.
BIT
S
TATUS
BS
ES
TS
RS
TCS
TBS
SYMBOL
R
EGISTER
Bus Status; note 1
Error Status; note 2
Transmit Status; note 3
Receive Status; note 3
Transmission Complete
Status; note 4
Transmit Buffer Status;
note 5
(SR)
NAME
VALUE
29
1
0
1
0
1
0
1
0
1
0
1
0
bus-off; the CAN controller is not involved in bus
activities
bus-on; the CAN controller is involved in bus
activities
error; at least one of the error counters has
reached or exceeded the CPU warning limit
defined by the Error Warning Limit Register
(EWLR)
ok; both error counters are below the warning limit
transmit; the CAN controller is transmitting a
message
idle
receive; the CAN controller is receiving a
message
idle
complete; last requested transmission has been
successfully completed
incomplete; previously requested transmission is
not yet completed
released; the CPU may write a message into the
transmit buffer
locked; the CPU cannot access the transmit
buffer; a message is either waiting for
transmission or is in the process of being
transmitted
FUNCTION
Product specification
SJA1000