450-0009 LS Research, 450-0009 Datasheet - Page 26

• Manufacturer Part Number: 450-0009
• Description: WiFi / 802.11 Modules & Development Tools TiWi-R1 Module with U.FL Connector
• Manufacturer: LS Research

Specifications of 450-0009

• Wireless Frequency: 2.4 GHz
• Modulation: GFSK
• Security: 62 bit, 128 bit, 256 bit WEP
• Operating Voltage: 3.3 V
• Antenna: External (Not Included)
• For Use With/related Products: LM3S1918
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Wave Soldering
If wave soldering is required on the host boards
due to the presence of leaded components,
only a single wave soldering process on the
side opposite the module is encouraged.
Hand Soldering
Hand soldering is possible. Use a soldering
iron temperature setting equivalent to 350°C,
follow IPC recommendations/reference
document IPC-7711.
Rework
The TiWi module can be unsoldered from the
host board. Use of a hot air rework tool and hot
plate for pre-heating from underneath is
recommended. Avoid overheating.
Additional Grounding
Attempts to improve module or system
grounding by soldering braids, wires, or cables
onto the module RF shield cover is done at the
customers own risk. The numerous ground
pins at the module perimeter should be
sufficient for optimum immunity to external RF
interference.
SHIPPING, HANDLING, AND STORAGE
Shipping
Bulk orders of the TiWi modules are delivered
in trays of TBD.
The information in this document is subject to change without notice.
Confirm the data is current by downloading the latest revision from www.lsr.com.
330-0041-Rev2.4
Never attempt a rework on the
module
individual components. Such actions
will terminate warranty coverage.
itself,
e.g.
replacing
Copyright © 2010 LS Research, LLC
Handling
The TiWi modules are designed and packaged
to be processed in an automated assembly line.
Moisture Sensitivity Level (MSL)
MSL 3, per J-STD-033
Storage
Storage/shelf life in sealed bags is 12 months at
<40°C and <90% relative humidity.
FCC ID: TBD, 15.247.
IC ID: TBD, RSS 210
ETSI: The European Telecommunications
Standards Institute. It produces the radio and
communication standards for Europe. Our
testing is to the ETSI standard EN 300 328,
which is the portion of the relevant directives
needed for a radio to obtain a CE mark.
See the User’s Guide for detailed information
regarding agency approvals.
AGENCY CERTIFICATIONS
Warning! The TiWi modules contain
a highly sensitive electronic circuitry.
Handling
protection may destroy or damage
the module permanently.
Warning! According to JEDEC ISP,
the
sensitive
handling
precautions
Section 2.1.
prevent permanent damage due to
moisture intake.
TiWi-R1 TRANSCEIVER MODULE
TiWi
devices.
modules
without
are
instructions
Read carefully to
summarized
DATASHEET
proper
are
Appropriate
moisture
Page 26 of 31
ESD
and
in