MAXQ2010-KIT# Maxim Integrated Products, MAXQ2010-KIT# Datasheet - Page 7

• Manufacturer Part Number: MAXQ2010-KIT#
• Description: RF Modules & Development Tools MAXQ2010 KIT MAXQ2010 KIT
• Manufacturer: Maxim Integrated Products

Specifications of MAXQ2010-KIT#

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The level-shifted serial port (J7) can be connected to
serial port 0 on the MAXQ2010 by setting jumpers as
follows.
• Connect jumper JU24 from pins 2 to 3.
• Connect jumper JU29 from pins 2 to 3.
Figure 5. USB Serial Port (COM4) Location in Device Manager
Interface on the MAXQ2010
Enabling the Serial Port
_______________________________________________________________________________________
MAXQ2010 Evaluation Kit
To configure programming or development tools (such
as MTK, MAX-IDE, or IAR) to work with the Virtual COM
Port (VCP) interface provided by the USB-to-JTAG
interface, first determine to which COM port the USB
serial port was assigned by the operating system. To
do this, open the Control Panel and select System →
Hardware → Device Manager, and then look in the
Ports (COM & LPT) section to determine the COM port
number assigned to the VCP (Figure 5).
Port Used by the USB-to-JTAG
Determining the Virtual COM
Interface
7