843996-6 TE Connectivity, 843996-6 Datasheet - Page 2

• Manufacturer Part Number: 843996-6
• Description: Contact Insertion/Extraction Tool
• Manufacturer: TE Connectivity
• Type: Toolr

Specifications of 843996-6

• Rohs Compliant: NA
• Product: Extraction Tool
• Features: Extraction Lance Reset Tools
• Lead Free Status / RoHS Status: RoHS Not Applicable
• For Use With: Micro MATE-N-LOK 3 Mm Contacts
• Lead Free Status / Rohs Status: RoHS Exempt Product

3.2. Locking Lance Reset
Check compatibility of the contact and tool, then
proceed as follows:
Rev C
Top View
Contact Locking Lance
Side View
Lance Reset Portion
1. Orient the lance reset portion so that the taper
is facing the contact locking lance.
2. Keep the lance reset portion against the
contact and slide it towards the base of the
contact locking lance until it bottom
Lance Reset
Portion
Tip of Tool
Reset Locking Lance
Extraction
Figure 2
Figure 3
Wires
(See Figure 3)
Back of
Housing
Contact Locking
Lance
Window
4. MAINTENANCE AND INSPECTION
The tool should conform to the dimensions provided in
Figure . It is recommended that each tool be inspected
upon arrival to be sure it has not been damaged in
transit and at regularly scheduled intervals to be sure it
remains functional.
Keep the tool clean.
5. REVISION SUMMMARUY
Since the previous release of this instruction sheet,
the new company logo has been applied
3. Remove the tool. The contact is ready for 
re-insertion into the housing.s.
NOTE
i
Damaged contacts should not be used. If a
damaged contact is evident, it should be cut from
the wire and replaced with a new one.
408-10020
2 of 3