PD70-01B/TR7 Everlight Electronics CO., LTD, PD70-01B/TR7 Datasheet - Page 7

• Manufacturer Part Number: PD70-01B/TR7
• Description: Photodiodes Photodiode
• Manufacturer: Everlight Electronics CO., LTD
• Type: Chipr

Specifications of PD70-01B/TR7

• Photodiode Material: Silicon
• Peak Wavelength: 940 nm
• Maximum Reverse Voltage: 32 V
• Maximum Power Dissipation: 150 mW
• Maximum Light Current: 25 uA
• Maximum Dark Current: 30 nA
• Maximum Rise Time: 50 ns
• Maximum Fall Time: 50 ns
• Package / Case: SMD-2
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 25 C
• Photodiode Type: PIN
• Polarity: Forward
• Reverse Breakdown Voltage: 32V
• Dark Current (max): 30nA
• Power Dissipation: 150mW
• Light Current: 25uA
• Rise Time: 50ns
• Fall Time: 50ns
• Operating Temp Range: -25C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 2
• Package Type: SMD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4.Soldering Iron
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
5.Repairing
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
Everlight Electronics Co., Ltd.
Device No：DTD-700-082
Repair should not be done after the LEDs have been soldered. When repairing is
Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3
Prepared date：07-20-2005
http:\\www.everlight.com
Prepared by：JAINE TSAI
Rev 3
PD70-01B/TR7
Page: 7 of 10