HSDL-3602-008 Avago Technologies US Inc., HSDL-3602-008 Datasheet - Page 23

• Manufacturer Part Number: HSDL-3602-008
• Description: Infrared Transceivers 1m 3V FIR 400units t op options
• Manufacturer: Avago Technologies US Inc.

Specifications of HSDL-3602-008

• Wavelength: 875 nm, 880 nm
• Continual Data Transmission: 4 Mbit/s
• Transmission Distance: 1.5 m
• Radiant Intensity: 250 mW/sr
• Half Intensity Angle Degrees: 30 deg
• Pulse Width: 1.6 us, 4 us
• Maximum Rise Time: 40 ns, 25 ns
• Maximum Fall Time: 40 ns, 25 ns
• Led Supply Voltage: - 0.5 V to 7 V
• Maximum Forward Current: 165 mA
• Operating Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: - 20 C
• Dimensions: 12.2 mm x 4.9 mm x 4 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

23
HSDL-3602 Interoperability with NS PC97338 Report
(i) Test Conditions
V
RLED = 2.7 Ω
Optical transmitter pulse width = 125 ns
Mode set to full power
(ii) Test Result
The interoperability test results show that HSDL-3602 IR
transceiver can operate ≥ 1.5 meter link distance from
3 V to 3.6 V with NS’s PC97338 at any IrDA 1.1 data rate
without error.
(C) Standard Micro System
Corporation (SMC) Super and Ultra I/O Controllers
For SMC Super and Ultra I/O Controller chips, IR link can
be realized with the following connections:
• Connect IRTX of the SMC Super or Ultra I/O Controller
• Connect IRRX of the SMC Super or Ultra I/O Controller
• Connect IRMODE of the Super or Ultra I/O Controller
Please refer to the table below for the IR pin assign-
ments for the SMC Super or Ultra I/O Controllers that
support IrDA 1.1 up to 4Mb/s:
CC
to TXD (pin 9) of the HSDL-3602.
to RXD (pin 8) of the HSDL-3602.
to FIR_SEL (pin 3) of the HSDL-3602.
= 3.0 – 3.6 V
RD, WR, CS
DACK, TC
A0 - A3
D0 - D7
DRQ
IRQ
14.314 MHz
CLOCK
SEMICONDUCTOR
PC97338VJG
NATIONAL
SUPER I/O
HSDL-3602 FUNCTIONAL DIAGRAM (B)
IRTX (63)
IRRX1 (65)
IRSL0 (66)
* MODE GROUND FOR
FULL POWER OPERATION
*
FIR_SEL (3)
MD0 (4)
MD1 (5)
TXD (9)
RXD (8)
*
HSDL-3602 Interoperability with SMC 669/769 Report
(i) Test Conditions
Vcc = 3.0 – 3.6 V
RLED = 2.2 Ω
Optical transmitter pulse width = 125 ns
Mode set to full power
(ii) Test Result
The interoperability test results show that HSDL-3602 IR
transceiver can operate ≥ 1.5 meter link distance from
3 V to 3.6 V with SMC 669/769 at any IrDA 1.1 data rate
without error.
GND (7)
FUNCTIONAL BLOCK DIAGRAM
HSDL-3602
HSDL-3602
V
CC
AGND (2)
SP
LEDA (10)
R1
CX1
CX2
V
CC
(1)