HSDL-3612-008 Avago Technologies US Inc., HSDL-3612-008 Datasheet - Page 16

• Manufacturer Part Number: HSDL-3612-008
• Description: Infrared Transceivers 1m 3V SIR 400units t op options
• Manufacturer: Avago Technologies US Inc.

Specifications of HSDL-3612-008

• Wavelength: 875 nm, 880 nm
• Continual Data Transmission: 115.2 Kbit/s
• Transmission Distance: 1.5 m
• Radiant Intensity: 120 mW/sr
• Half Intensity Angle Degrees: 30 deg
• Pulse Width: 1.6 us, 4 us
• Maximum Rise Time: 40 ns, 25 ns
• Maximum Fall Time: 40 ns, 25 ns
• Led Supply Voltage: - 0.5 V to 7 V
• Maximum Forward Current: 165 mA
• Operating Voltage: 2.7 V to 5.25 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: - 20 C
• Dimensions: 12.2 mm x 5.1 mm x 4 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.0 Recommended Solder Paste/
Cream Volume for Castellation
Joints
Based on calculation and
experiment, the printed solder
paste volume required per
castellation pad is 0.30 cubic
mm (based on either no-clean or
aqueous solder cream types with
typically 60 to 65% solid content
by volume).
1.2 Adjacent Land Keep-out and
Solder Mask Areas
16
Dim.
h
j
k
l
Adjacent land keep-out is the
maximum space occupied by
the unit relative to the land
pattern. There should be no
other SMD components within
this area.
“h” is the minimum solder
resist strip width required to
avoid solder bridging adjacent
pads.
It is recommended that 2
fiducial cross be placed at mid-
length of the pads for unit
alignment.
mm
min. 0.2
13.4
4.7
3.2
Inches
min. 0.008
0.528
0.185
0.126
Note: Wet/Liquid Photo-Imaginable solder resist/mask is recommended.
Figure 3.0. HSDL-3612-007/-037 PCBA – Adjacent land keep-out and solder mask.
LAND
Tx LENS
h
j
Y
Rx LENS
SOLDER
MASK
k
l