TLM-T700MPZA-01 Varitronix, TLM-T700MPZA-01 Datasheet - Page 21

• Manufacturer Part Number: TLM-T700MPZA-01
• Description: TFT Displays & Accessories TFT FULL COLOR LED BACKLIGHT
• Manufacturer: Varitronix

Specifications of TLM-T700MPZA-01

• Attached Touch Screen: No
• Background Color: Normally White
• Diagonal: 7 in
• Interface: RGB
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: - 30 C
• Operating Temperature Range: - 30 C to + 70 C
• Product: Displays
• Supply Voltage: 3.3 V
• Viewing Area (w X H): 152.4 mm x 91.44 mm
• Pixel Density: 800 x 480
• Module Size (w X H X T): 165.1 mm x 104.24 mm
• Backlighting: LED
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

11. Handling Cautions
11.1 Mounting of module
- Please power off the module when you connect the input/output connector.
- Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some
11.2 Precautions in mounting
- When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry
- Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration
- TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface.
- Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when
11.3 Adjusting module
- Adjusting volumes on the rear face of the module have been set optimally before shipment.
- Therefore, do not change any adjusted values. If adjusted values are changed, the specifications
11.4 Others
- Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours.
- Store the module at a room temperature place.
- The voltage of beginning electric discharge may over the normal voltage because of leakage current
- If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into
following problems may happen possibly.
cloth.
or spots.
Please handle with care.
handling.
described may not be satisfied.
from approach conductor by to draw lump read lead line around.
eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap.
1.The noise from the backlight unit will increase.
2.The output from inverter circuit will be unstable.
3.In some cases a part of module will heat.
VL-PS-TLM-T700MPZA-01 REV.A
(TLM-T700MPZA-01)
MAR/2007
PAGE 21 OF 22