CLUB1000-S3 RF Solutions, CLUB1000-S3 Datasheet - Page 3

• Manufacturer Part Number: CLUB1000-S3
• Description: RADIO SYSTEM, 3CH, 1XTX 1XRX, 1000M
• Manufacturer: RF Solutions

Specifications of CLUB1000-S3

• Svhc: No SVHC (15-Dec-2010)
• Model Name / Number: Club 1000-S3
• Range: 1000 M
• Supply Voltage Max: 24VDC
• Supply Voltage Min: 12VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DSCLUB-2 Jul ‘06
Notes for use when Connecting the Remote Control System to a Clay Trap Release
This system is supplied complete with cable in order to connect to the Clay Trap Release.
The system is pre-wired (as diagram below) to operate with most trap releases, before connecting, CHECK
YOUR CONNECTIONS. (using a voltmeter) if you are in any doubt, DO NOT CONNECT THE SYSTEM,
consult a qualified Electrician. Although the system operates on 12/24V damage may occur to the receiver unit
if wrong connections are made.
Installation Notes
1. Connect Power to the Receiver unit.
2. When the Receiver unit has power connected the Power LED will illuminate. This must be ‘on’ for the
3. Check operation of the Remote Control
4. When the power LED is ‘on’ the Remote Control System may be operated, Check operation by firing
5. Check the Wiring to the Trap
6. The receiver has been pre-wired to the following Circuit
7. When operated, the receiver provides an output (Blue Wire) which momentarily connects to 0V.
8. Alternative Wiring : The switched output may be connected in several ways, please see the ‘Relay
The receiver unit requires the following connections to operate
system to operate.
the transmitter and check that;
•
•
If this does not work then check your Switch addresses on the transmitter and receiver.
Output Connections section. If in doubt consult a qualified electrician.
The LED on the transmitter illuminates
The Rx Data LED on the Receiver unit (next to the power LED) illuminates.
12V supply (Brown wire as supplied)
OV Supply (Yell/GRN wire as supplied)
These may not match the wire colours on your Trap!
Warning : Not all Clay Traps have the same wiring convention!
Relay Output
‘C
117 Receiver
Unit
COM
N.O.
©2006 Reg. No. 227 4001, England
LUB
N.C.
12V
0V
’ S
ERIES
Grn
Brown
Blue
/ Yell
12V
Switched
Output
R
0V
ADIO
Page 3
R
ELEASE