S203MC32 ABB, S203MC32 Datasheet - Page 17

• Manufacturer Part Number: S203MC32
• Description: MCB, 3 POLE, 32A, 10KA, C CURVE
• Manufacturer: ABB
• Series: System Pro M Compactr

Specifications of S203MC32

• No. Of Poles: 3
• Voltage Rating Vac: 230V
• Mounting Type: DIN Rail
• Svhc: No SVHC (18-Jun-2010)
• Approval Bodies: IEC/EN 60898, IEC/EN 60947-2, VDE 0641 Part 11, UL 1077, CSA
• Current Rating: 32A
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

System
pro M compact
Additional devices
Mounting additional devices
Additional devices are always fitted from the right hand side:
S function signal contact
H function auxiliary switch
1. Signal contact and auxiliary switches
Retrofittable to the right side of circuit-breakers or shunt releases without extra installation devices.
1.1 Universal signal contact/ auxiliary switch type S2C-S/H6R
Description
S2 – serial code:
S2C-S/H6R is a universal device complementing the range of pro M compact, which is supplied to offer signal contact functionality,
or the auxiliary switch can be activated, all you need is a screwdriver. The universal switch can be with MCBs and RCCBs.
Up to three S2C-H6R can be mounted (one signal contact max. fitted to MCB or RCCB). Both the switchgear and the S2C-S/H6R must
be in the ON end position to ensure that the coupling is correct.
Function of the signal contact S
Signal is transmitted only if caused by fault-tripping of the circuit-breaker, but not if the switch has been switched on or off manually.
Press the orange reset button to acknowledge the has-tripped signal.
Function of the auxiliary switch H
The switch always indicates the switching position of the MCB, irrespective of whether the switching position is attributable to manual
operation or fault tripping.
Functionality selection
To select either the signal contact function S or the auxiliary switch H, use a screwdriver and adjust to position S, or as the case may be, H at
the side of the device.
– signal contact/auxiliary switch S2C-S/H6R for MCBs and RCCBS
– auxiliary switch S2C-H6R for MCBs
– shunt release S2C-A for MCB
to MCBs
and RCCBs
®
only to
MCBs
Supplementary devices
S 2 C - S/H 6 R
R = right side-mounted
6 = change over
H = auxiliary switch
S = signal contact
C = compatible to pro M compact
to shunt releases
17